Cage for quail with your own hands: Production features

Cage for quail with your own hands: Production features

Modern medicine recognized that it is possible to cope with many illnesses by using quail eggs. The content of quails is not such a difficult task, since they are not capricious, do not hurt and do not require expensive vaccinations. And the whole process of breeding eggparts begins with creating comfortable and spacious housing for them.

1
First of all, I would like to note that it is good to "settle" quails with families, where 3-4 female and one male. Therefore, the size of the house is customary to determine on the basis of such a number of birds. Make a cell in the width of centimeters 30, in a height - 25 cm.

2
Cages for quails are wooden and made of grid. When creating a cell, remember that it is not worth making a fully wooden structure, as you have to additionally think over the lighting system, heating and ventilation of the house, which complicates our task. In addition, the tree is the cheapest material for thoughtless expenses. Therefore, it is easier to make a frame of wood and cover it with a metal grid. So do it.

Prepare materials and tools:

  • fine metal mesh (cells up to 20 mm, a 180-cm linen by 180 cm), stainless steel, dense, so that it was rigid enough, did not fall on the floor and did not bete on the sides;
  • wooden planks (length 30 cm, thickness up to 25 mm), in an amount of 8 pieces;
  • sturdy metal accessories - corners for fixing the frame, handles and canopies for the door;
  • nails (15 large, 25 small);
  • self-tapping screws (about 20 pieces);
  • glue.

From the tool you will need a hammer, a screwdriver, a roulette. In addition, not superfluous scissors for metal.

Operating procedure:

  1. Wooden strips Connect each other, according to the scheme, with the help of the corners that will hold perpendicular. Fix the corner with self-draws and nails. You can additionally strengthen the slats with glue.
  2. Then we will pull the grid. Fasten the sheets outside the frame with nails: half of the nail to take into the tree, the second, so that it keeps the grid.
  3. Nails and self-tapping screws in the wood as close as possible. So you will reduce the risk of quailing to a minimum.
  4. Wooden structural elements are recommended to be treated with varnish.

3
For making cells from the grid, prepare:

  • Grid. Take the canvas with a margin, more than when making a building with a wooden frame, 185 by 185 mm.
  • Nails for fixing the grid. You can have a bracket or even building such fasteners of thick wire.
  • Scissors for metal.
  • Pliers.
  • Tight gloves so as not to damage hands.

It is recommended to act like this:

  1. Option 1. Cut sheets for walls, ceiling and floor, focusing on the cell drawing for quails. Crerate the walls with each other. Use nails or other devices that you preferred - brackets, wire. Remember that the connection should not occur.
  2. Option 2. Memble the wall length on the mesh canvas, wrap it to create an angle, again measure the length of the wall and wrap the angle. It turns out that the wall mount will be in one place. The ceiling and the floor will have to be attached to technology that we talked above.

4
To create a ferum for quails, make a few identical cells and put them on each other. But it is not necessary to get involved in the story: usually builds put in several tiers - 4-5. The first of them is placed at an altitude of 30 centimeters from the floor. The top ceiling should be located below the ceiling indoor by half the meter. For the reliability of the shelving, secure the houses with each other.

5
Pallets for cells Make from any material that you have at hand: plywood, chipboard, boards, it is desirable to provide a double bottom or a spare tray at the time of cleaning the first. They should be a little wider than the cage is to be comfortably cleaned. Do not forget to handle the collection of litter using a high-quality antiseptic tool to prevent the appearance of an unpleasant odor. Outside of each cell, attach the feeders and drinkers, if necessary, you can always move them inside the house, and then remove. For feeders and drinkers yaytsesbornika use galvanized metal.

Thus, the production of cells for quail under the power of each wizard, if you correctly approach this work and take into account our recommendations.

Add a comment

Your e-mail will not be published. Mandatory fields are marked *

close