Window - an integral attribute of any building. It provides penetration of sunlight and fresh air. The windows are absolutely different in size, form and material used in their manufacture. If, for the improvement of your home, standard windows are not suitable - you will have to order their manufacture, and this is very expensive. But if you have small carpentry skills and suitable tools - you can make the window yourself.
1
For the manufacture of the window you will need the following tool:
hacksaw;
chisel;
plane;
wood glue;
drill;
screwdriver and screws;
wooden blanks of the desired size.
2
The manufacture of the window should be started from the box. To do this, take four wooden boards and select M-shaped groove in each of them. This groove will serve as the place of installation of the frame and will improve the tightness of the structure. To avoid shrinkage, use well-dried wood without cracks and bitch. At the ends of the boards, make a drink "Lastochka Tail" to improve their connections. Treat washed with carbon black glue, such as "moment. Stolar ". Firmly press the boards at right angles and fix in this position for 5-10 minutes, then drill the holes in each corner and score on them wooden "nails" - rods from dense wood 3-5 centimeters.
3
The next step is the manufacture of the frame. The technology of its manufacture is the same as the box. The frame is made of several millimeters less than the inner perimeter of the box calculated by the groove. Depending on the desired appearance, the total area of \u200b\u200bthe frame can be divided into several sections with wooden partitions. Partitions are attached to the frame of spikes. At every end, the partition is made spike, and in places of its installation to the frame - the recess in which it is inserted. Connection locations abundantly melt glue on a tree. For the subsequent installation of glass in the frame and its partitions, do a groove along the entire length.
4
For dense adjacent glass to the frame frame for its cutting, remove the most accurately as possible. For cutting sheet glass on pieces of the desired size, a diamond glass cutter is perfect. If this task seems to you complex - order the finished glass of the desired size. Insert the glass into the groove and fasten the wooden corner on the reverse side. To improve the isolation and prevent the cutting of the glass during the opening or closing of the window - in the places of the glass of glass to the tree, put the pieces of pacles to it or wake them with a small amount of any sealant. With the help of loops and screws, attach the frame to the box. Insert the box into the wall and secure securely using the screws. If the walls are made of solid material, such as concrete or brick, use the anchor bolts.
5
Gaps between the window and walls close up with the help of mounting foam. Makroflex Premium Window, Ceresit TS 61 or Soudal Soudafoam foam is perfect for this. Inside the room, mount the slopes and the windowsill, outside the opening. Cover the finished window with varnish or paint - it will improve its appearance and betray the tree extra durability.
Now you know how you can independently make a wooden window. The work of the specialist will entail decent costs, and if you do this whole family and invest in your work all soul and fantasy, you can not only save, but also create an element that will be a highlight of your favorite house.
0
1554
