Installation of metal-plastic windows in a wooden house has its own characteristics due to the shrinkage of the building. If you do not take into account all the properties of wood, the windows will quickly fail.
Shrinkage of a wooden house and countermeasure measures
It is believed that the shrinkage of the building lasts 5 years and eventually deforms the walls. But that's not all. Over time, the logs dry and decrease in diameter, reducing the height of the wall by 1.5 cm. So that the window does not perform a mechanical load from the strain of walls, there are special structures in the window openings, which are called the placade or the opposite.
Design Okosyanka
There are two types of the opposite - into the mortgage bar and in the deck. According to the first embodiment, the groove is performed in the bar in which the cluster element is inserted. The second option involves the implementation of the spike in the bar on which the opposite will hold on.
For plastic windows, it is recommended to use the upgraded version when the crest makes the crest on the ends, the window boats with a groove are put on it, and then a plastic window is fixed to it. The design of the faucet is the four elements - two bars with grooves on the ends and two boards with spikes around the edges. The bars have vertically in the window opening, the boards are placed in spikes in the grooves of BRUSEV. With such a design, drying the logs will be moved along the sinus inside the boiler, without affecting the windows.
Preparation of window opening
On the vertical walls of the window opening, apply two lines vertically, the distance between them is 5 cm. Cut the saw extra material, two crests should be obtained with a height and width of 50 mm. Combs must be strictly vertical and symmetrical to each other.
Production of lafethe elements
Prepare two vertical timers with dimensions of 10x15 cm and a length of a smaller window opening by 5 cm. In the middle part, cut the groove 50 × 50 mm. Install bars in spikes. So that there is no screenshot, pre-wrap the rolling packle comb.
For horizontal chain elements, the boards are designed 150 × 10 mm. In the ends of the boards, make the grooves of 50 × 50 mm and install on the comb in the upper and bottom of the boilers.
LowFeta manufacturing control
Measure the internal sizes of the boilers and compare with the window. The width of the frame must be 2-4 cm larger windows width, and the height is greater than the height of the window by 5-7 cm. The slots are necessary for the fats and for the installation of the window sill. Horizontal boards must be smooth, otherwise the window in the opening does not insert. Between the yoke and logs, at the top of the window, there should be a gap of 50 mm for shrinkage at home. Fasten the upper and side elements of the fault among themselves with self-draws. Do not fasten the boys to the logs of the house, otherwise the meaning of the clog is lost.
The correctly mounted frame will take the entire load during the shrinkage on itself, will not allow the logs to shift horizontally towards the window, strengthens the wall of the house near the opening.
Montage of the window sill
On the window box, drink small grooves (0.5-1 cm), which will fix the windowsill. Install the windowsill on the regular place, align with wooden chips in the horizontal plane. Secure the windowsill with self-drawing. Fasteners screw in the place where the window frame is installed. All the gaps under the windowsill make foam or silicone.
Mounting window
Installing the window on the mounted stitching is not different from the usual mounting. Initially, remove the glassbox with the frame. Rama, install in the boys, place in a horizontal and vertical plane and secure regular fasteners. Then set the glass bar and install the fittings. Get all the cracks of the mounting foam. In a wooden house, plastic windows are often decorated with platbands.
The installation of plastic windows on the souls is the only option of high-quality mounting in a wooden house. The placade always retains in the integrity of the glass and the metal profile of the window.
0
1405
