How to suspend peonies

Those who, on their homestead, decided to grow peonies and admire their beauty should be aware of the fact that simply put the bulbs of flowers in the soil - not enough. It is necessary to understand that these are bush flowers and require protection against bad weather, wind and even themselves - peonies are sufficiently heavy, so they can simply break the stem of the flower weighing. To ensure the safety of peonies, they need to be able to properly tie.

1

Designs for garter with your own hands

Today, the designs for the pion garter can be purchased in any specialized garden store, so finding such a product will not be particular difficulties. The question is in the following - whether to give considerable money for the designs for flowers that can be made with your own hands? Let's consider very simple and practical versions of such structures that can be done without any problems without help.

Before you begin assembling one of the designs, you must first prepare all the necessary materials (so that you are at hand) and measure the volume and other parameters of your plant.

Consider in detail the first version of the support for which you will need the following tools:

• Device, cutting fittings (manually do it is very difficult)
• Roulette construction
• Composite fittings (optimal diameter it will be 7 mm)
• Armature from non-metallic material (diameter of such a part must be at least 4 mm)
• Plastic clamps (several pieces)

Composite fittings will need to create the foundation of the structure itself, but the transverse supports must be made from the reinforcement of non-metallic type. We need the clamps will be needed to fix the ends of all parts of the reinforcement.

The process of manufacturing a design for pion garters is as follows:

• First you need to cut the materials. To do this, you should have all the necessary materials at hand, as well as the size of the bush, and only after that you can already cut the reinforcement on the desired size.
• Do not forget that when measuring the necessary dimensions it is necessary to take into account the fact that part of the structure will be in the ground, and therefore, the deeper you install it, the crease it will turn out.
• The next stage in this process is to install the support itself. When the entire reinforcement is cut, you need to pave it under flowers, but the edge is combined with plastic clamps. It is very simple to do it, and this process will not take much time.
• After the operations proceeded, you can install support to the depth you need.
• The next step in this process is to set the basis of the cross section. The base is already installed, now you need to install the transverse parts of the design. It is necessary to make them from the reinforcement not from the metal (here any material is at your discretion).

• We measure the height of the bush and cut the reinforcement for the size obtained.
• The cross-type supports must be fixed by the same clamps as the main parts of the reinforcement.
• Despite the fact that the plastic clamps, they perform their functions canceled and precisely thanks to it, our design will be able to endure without problems and deformities and with a strong rain and with strong wind.

Another embodiment of the design for a colors garter with their own hands. In this case, the manufacturing process is similar and very similar to the above considered, only the difference is that the materials for this design every owner will be able to find on its household site or in Saraj.

Tools that will be useful for this process are as follows:

• Metal pipe (normal water supply perfectly)
• Small pieces of ordinary lining
• Hose (need a small segment, preferably a large diameter)
• Selfless

Agree, all these elements can be found without any problems in their "honeycomb", so you will not make any problems. Even if all this you have to buy, then the cost will be minimal (especially if you compare with the cost of buying a finished design for the pioneer bush).

The process of manufacturing the structure under consideration is as follows:

• First you need to make from the existing materials of the ring, they will be the main details of the future design for garter colors.
• In order for the intention to embody into reality, it is necessary to take some kind of round or cylindrical shape and spin the pipe around it, having finished up to the desired size.
• Ultimately, we get a spiral where the optimal option is the presence of two rings.
• Now the rings need to be cut, after which it is connected to their ends with each other using the segments of the garden hose prepared earlier.

• In this case, the diameter of the hose should be larger than the diameter of the camp of the pipe, from which we did the ring. But at the same time, the difference in diameter should not be too big. To connect to was strong and reliable.
• The next step - we divide the rings into three parts, of course, they should be equal. We put the mark on these places, it is here that you will need to attach the screws in order to after attach the legs there.
• Looking down in trimming pipes, after connecting the top. After that, it will be necessary to connect the upper part, then the bottom.

So you do without any problems, without spending a lot of strength, you can make a design for the pion garter and install it around the bush.

Of course, you can simply touch the bush with a fishing line or wire.