How to wash white sneakers

White sports shoes concisely complements almost any image, but it can be very easy and destroying it. The problem of white color is that any dirt is clearly visible on it, and the sports shoes collect simply a huge amount of dust and spots. To dirty shoes do not spoil the appearance, it is recommended to be removed correctly.

1
Preparation

Before starting to wash white sports shoes, laces extracted from it and get insoles. It must be done so that they do not spoil during washing. If they themselves need cleaning, they are erased as follows:

Heat so much water so that it is enough for a small pelvis. After boiling, it is transferred to the harvested container and the oxygen bleach is bred in it.
The laces are lowered in the water for 30 minutes, after which they erase them with the household soap. For the ralk, simply warm water without any impurities. They wash them with a brush and soap, after which they are rinsed from the foam and give drain. Neither laces, no insoles squeeze.
After water flows, they are dried on a flat surface. In no case recommend putting them on the battery - they lose the form and become less.

The sneakers themselves also need preliminary preparation. Since dust and street dirt were nalipped on them, they purify them in the following way:

Dry dust and dirt eliminate hard brushes for shoes, vigorously rubbing sneakers. The soles are soaked under warm running water, removing the stones stuck in the soles and frozen dirt in the pattern.
Sometimes black stripes are formed on the sole. To remove them, an ordinary eraser is used, which allows you to achieve a monophonic white color.
If the sole has acquired a yellowish tint, then the former whiteness is returned to it using a varnish removal fluid. Problem places are simply working with a cotton swab in this fluid, and they become white again.
Also, white is returned to a more radical way with a bleach. To do this, the larger dose of powder is dissolved in water, and after the soles of sports shoes are lowered in it for 60 minutes.
After that, they are wiped with a cloth first, then brushed and washed under water. Only after the completion of these stages go to washing.

2
Washing fabric sneakers

Fabric sports shoes are erased in various ways. The easiest way to put them in a specially tailored bag and put in a washing machine. But even such a simple way requires a certain approach. For proper washing you need:

Pick up a high-quality washing powder for the fabric, fall asleep it in the tray of the washing machine and choose the "Sport" mode. If such a mode is not provided, then "delicate washing" is chosen. In this case, it is recommended to disconnect the drying mode, and add another rinse to the washing mode.
The temperature regime is not exhibited above 40 degrees, as it can destroy shoes. If it has some decorative elements in the form of reflectors, then the machine washing is replaced by manual.
The mesh nylon from which the sneakers are made, we are late. But if there is a fear that the sneakers after the machine washing will be revealed, then they are recommended to soak them for 30 minutes. In a warm soap solution.
After that, they brush them with a soft brush over the tissue and are carefully rinsed to get rid of soap residues. The spots and persistent pollution are cleaned with special solutions.

3
Clearing skin sneakers

Leather sports shoes are much more difficult to dump, because the skin of the skin is grubling from contact with water and becomes yellow. At the same time, it is much more complicated in the sock, as the dirt on it will stick stronger than to fabric sneakers. Therefore, special measures are needed for cleaning white leather sneakers:

First of all, insoles and laces are removed from leather sneakers, then neatly knocked dry dust. If she did not have time to stick to the skin, then the part of the dirt turns into the process of knocking.
After that, they take a sponge, soap and foam from the household soap process the entire surface of the sneakers. If there are spots on the skin, then their clutch is a small brush, painted in a soap solution. It is important that as possible smaller sneakers in contact with water.
The remnants of the soap from the leather product are eliminated with a damp cloth. To clean genuine leather, a mixture of starch and milk is also suitable in a ratio of 1: 2. When mixing, the mass is obtained thick, pasty. It is applied to sneakers for 15 minutes, after which they are removed with a damp cloth.
After drying, the skin is polished with colorless cream and peeled cords and insoles return to the place.

4
Cleaning various spots

With white sports shoes, small local pollution is eliminated using toothpaste. To do this, the brush will urinate, squeeze the pasta to it with a thick layer and applied to stains. It is especially useful in thus cleaning the fabric inserts to which the dust lipnet. The remains of the toothpaste are removed with a damp cloth.
The discovered spots are removed by a special mixture, which is made from washing powder, peroxide and vinegar, taking them in a 2: 1: 1 ratio. After the compound, the paste-shaped cleansing mixture is burned with a brush and evenly distributed along the spots of the spots. For mesh sneakers, this method is not suitable, since they can damage the grid.
To clean the mesh material, use soda mixed with lemon juice. When they are connected, a resistant magnificent foam is formed, which is applied to contaminated areas.
If the stains are not amenable to home removal, use "Vanish". Two caps of a bleaching agent are bred in boiling water, in it the sneakers are soaked for 2 hours. After that, they are erased by hand, clamp and dried.

The process of getting rid of white sneakers from stains is not so complicated as it seems at first glance. It is enough to learn all the available ways to clean them and the process itself will not take more than an hour.