How to install windows in a wooden house

The walls of the wooden house for the entire period of operation are subjected. At first, this is a markedly unarmed look, afterwards the drying process slows down, but still occurs. To eliminate the deformation of window systems, their installation in a wooden house occurs in a special technology.

To install the window in the cutting house, a casing (otherwise - the stitching) performs the following functions:

Reliable fastening of the window structure;
Holding logs from bias;
Ensuring the independence of the window from the walls.

The placade is two types: when using wooden windows in birings, the grooves are cut down and bars are fixed; For the installation of PVC windows, on the contrary, the crest is made on the ends and the casing is put on it.

Thus, the window through the window is first prepared, then the opposite is performed, which in the assembled form should be 8 cm less than the height of the loop. The material for its manufacture usually serves a timber 100x150 mm. The placard is installed in the following sequence:

Put down the bottom board;
Spikes are packed;
Side shoals are put;
From above through the gap, the vertex is started and falls into the grooves;
All items are fastened by self-drawing;
The perimeter of the Owl is clogged with insulation.

Important: Fastening elements (screws, nails) should not connect with the ridge!

Only after these actions measure the manufacture of the window itself. Plastic products are installed in a casing according to the generally accepted technology:

The frame is aligned with wedges, tested by the level of horizontal and vertical planes;
Fixation is performed by anchor plates and screws;
The seams of the mounting foam are filling, after drying the surplus, the protective tape is cut and pasted;
The decoration of slopes is carried out, the sump and windowsill are installed;
Checked and adjustable moving window sash.

On video from professionals, the process of installing windows is shown in detail and all problems arising during installation in wooden houses are considered: