Shutters protect the room from the sun and prying eyes, but also give comfort and perfectly suited for any interior. Depending on their construction, horizontal, vertical and roller blinds. Installing blinds in several ways. Let us consider in detail on the mount plastic window blinds.
1
For installation you will need the following:
screwdriver;
pencil and ruler;
screws;
brackets and clamps are often enclosed in the kit to the blinds.
2
On the frame of a plastic window may only fix the horizontal and roller shutters. Design shutters must be completely flattened. On top of the cornice must be mounted three arms, at each end and in the middle. Cornice is applied to the window opening and pencil marks the spot fixing. Be sure to check up smoothness of line markers.
3
Brackets are removed from the eaves and screwed the two screws using a screwdriver for greater reliability. Do not worry about damaging a sealed plastic box, because it is a multi-chamber. Blinds fixed until it clicks on the brackets. Checked design management mechanism, pay attention to the eaves - if he did not falter. If you want to immediately tighten up the screws.
4
At the bottom are mounted plastic clips such as self-tapping screws. Fabric blinds snaps in order for it not to waste during the opening mode of ventilation windows. Remember that the quality of installation depends on correctly matched the size of the blinds. In height they should be less than the opening of 2 cm, and width - 4 cm.
5
Instead of screws, you can use adhesive tape or a double scotch, but screwing structure more reliably. But if you decide to remove the blinds structure forever, in this case do not have to plug the holes that are left of screws.
You can install the blinds in this way, not only on all the window canvas, but also separately on each sash. Due to this, it is possible to discover blinds only on the one hand.
Share advice:"How to fix blinds on a plastic window"
0
1612
