How to make a wooden porch

How to make a wooden porch

To select a wooden porch design, there are many options: a few steps and a small platform, a carved design under ancient, porch patio or an open veranda. In any case, the building must be combined with the appearance of the house, and the complexity of the manufacture of the artist's practical skills.

1
At the preparatory stage, a porch device is thought out, the drawing is thrown out and the amount of materials is determined. For structural elements, various lumber are used:

  • Bottom beams - 100x200 mm timber;
  • Paul - 40x100 mm boards;
  • Racks - bars from 100x100 mm;
  • Rafters - depending on the step;
  • Dooming - board with a thickness of 30 mm.

2
The support poles can be made steel, fold from stone or brick, cast from concrete, as well as apply wooden piles with protective impregnation. If on the site of the future porch is posted paving tile, Under the lightweight construction is enough to put metal supports.

3
Antiseptic (Tikkurila, "Sezheng") are processed by lags, stacked on the pillars and are fixed by anchors or plates - the fastener should be used galvanized. Next, the racks for the roof are installed, rafters, doom and roofing material are mounted. Such a sequence will allow you to carry out further work regardless of the weather. The playground is covered with gender boards impregnated with bioprotection on both sides.

4
The staircase is manufactured, the basis of the cosomes - wide boards with stages for steps, carved so that the height of each stage is no more than 20 cm, and the width is 25-45 cm. When used railing In the ends, the holes are drilled in which with the help of the waders are fixed balaasins. On the boosters, starting below, first screw the vertical elements are screwed, and then horizontal.

5
The finish of the porch is performed: the wood is stuffed with the compositions of Belinka Base or Biofa, covered with a verse, then paint or transparent varnish is applied.

With the arrangement of the roof of the tree, healthy and well-dried wood is used, the budget selection of the material will be pine or spruce, the construction of larch or oak will last long. The designs of Breus and Korjon, brought from the forest, are originally looking from the forest, which is exactly what the author of the next video roller.

Add a comment

Your e-mail will not be published. Mandatory fields are marked *

close