Acquisition of a finished dressing table or order of the stone panel of the desired size is simple solutions to the arrangement of the bathroom, but their implementation will require big money. A more economical option will be an independent manufacture of table tops from inexpensive and affordable materials.
The surface of the homemade countertop will cover the cafeter. To pick up the quantity and size tileThe dimensions for the sink and its configuration are determined, then the drawing is drawn. Still need:- 1-2 leaf of waterproof plywood 18 mm thick;
- Profile galvanized or corner;
- Plasterboard moisture resistant;
- Self-tapping screw;
- Impregnation of wood;
- Putty;
- Primer;
- Sealant;
- Glue tile;
- Mesh fiberglass;
- Grout for seams.
To perform work, the power tools are useful: drill, jigsaw and bulgaria, as well as brush, spatula and mortar packaging.
- It is planned on the plywood sheet of the contour of the table top and the hole under the sink.
- The billet is cut into the jigsaw and is used as a template for creating two parts: the first is the same, but from drywall, and the second is from plywood, but without cutout for washing.
- Wooden elements are impregnated with a protective composition.
- Using the profile, the frame is made on the wall, on which plywood shapes are fixed with self-draws.
- The upper plane is covered with a plasterboard blank. The convex end of the countertop is performed from the GVL band, cutting it through 1 cm.
- A hole is cut into the lower part under the drain of the shell.
- All surfaces are put off, amplified by the mesh and are covered with primer.
Lovers of durable and fundamental can try to fulfill the table top from concrete at home, but in this case you will need to consider a reliable basis.
0
2939
