Methods for installing the washing directly depend on its material, form and model. An important role in this process is given to the material of the tabletop and wall covering. Despite the seeming lightness, the work on the installation of washing requires care and hardness. Any deficiency in the process may entail sad consequences, for example, the flooding of its apartment and the apartment of the neighbors living below.
1
Installation is always preceded by a choice - purchase the model of the sink that interests you. At first, calculate the location of the sink, then decide on its size. By purchasing the car you need in the store, remember that some sinks can be attached to several ways that depend on what result you want to get, and some only in advance in a certain way. By the method of fastening the product can be divided into embedded and overhead.
2
Overhead washing - outdated, but not fully overwhelmed with an option to arrange kitchens. This design completely covers the locker and combines an ordinary sink and a worktop. Most often, they apply on one-standing kitchen blocks. Fasteners such a sink is extremely simple. By installing the sink on the sheet (a special locker without the rear wall and countertops), plug the drain siphon and the mixer to it. Suit itself, fasten with the help of the fasteners running. Corners are focused on the entire perimeter of the product, somewhat on each side. Before installing to the top ends, the substoles are abundantly applied by a sealant, which not only will prevent his swelling in the event of moisture ingress, but also reliably glue the wash with a support.
3
Curling sinks - the most common view of the kitchen sinks. They are made of any material and may be the most diverse form. Installation of such products is carried out in a solid worktop. To apply markup on the table top, use the finished template that is complete with the sink, the use of which will greatly facilitate the task. If there is no template - turn the sink upside down and attach to the tabletop where it is planned to install it. Circuit contour pencil. Pattern or design Apply at a distance of five centimeters from the edge of the countertop, the cutting line drew inside the outlined circuit, delving into 1.5-2 centimeters.
4
Drilling a hole inside the resulting circuit, use the electric bike to drink it. Spice countertops treat the sealant - it will protect it from moisture. Under the edge of the sink, cover a special insulating tape that prevents the waterproof. If this tape is not included - use sealant. By inserting the sink into the cut-cut hole, secure it with clamps from the purchased kit. Will erase the excess sealant, connect the mixer and drain, install the tabletop in place. Washing ready for use.
If you want to replace the sink - you can easily do it yourself. But if you wish to install an expensive washbasin, made, for example, from granite or other expensive material - better contact a specialist. The cost of these works will be much less than the value of unplanned expenses that have appeared in your case of damage.
0
982
