Brick baths are the most durable. They are much better than bathing from wood, since not such fire hazardous, and most importantly - the stronger the relatives from the cut. It is best to build such structures at a distance of 10-12 meters from residential premises for compliance with fire safety measures. If there are reservoirs nearby, then you need to take into account all possible situations (the water level can rise and fill the construction). Therefore, the bath must be at a safe distance from the water or on the elevation.
1
Any construction should be started from the project. And projects can be different: in price, in size, to taste. Take, for example, a budget project. In a brick bath for complete comfort, a steamroom, a bathroom, a pre-banker and washing. In the project, all this and need to be considered: the location of the rooms, size, ventilation, sewage, and what to pull the bath (gas, electricity or solid fuel).
2
Then we count how much the material goes to build, and make purchasing. To build a bath, it is best to use clay red brick or white silicate.
3
You need to start building a bath with a foundation. Before this should be prepared, remove the top layer of the Earth so that there is no vegetation, clean the area under the bath, make a layout. The foundation is better to make a tape. On the perimeter digging a depth of 50 cm and 40 cm wide, fall asleep with sand and rubble. Then you need to make a formwork, put the reinforcement in the ditch and pour concrete. Be sure to take into account where the pipes will be held for drain (sewage), they are allowed under the foundation.
4
When concrete freezes, you need to put waterproofing and you can begin to masonry walls. To make the walls to be even, it is necessary to make apartments with a plumb. The first row should consist of a whole brick, the laying of a row always begins with the facial laying; Ceramics brick surely watered in water before masonry. Masonry methods are different: in one and a half bricks (such a wall inspected from the inside), double walls with a layer of 5 cm and well laying. The masonry solution consists of 2 kg of cement M500, 10 kg of sand, 0.5 kg of lime, water, how much will enter, it is desirable to add a plasticizer at the end (the solution becomes soft).
5
After the walls are built, you need to warm them. Materials for insulation are different. If you did a double laying, then the distance between the walls is filled with a special thermal insulating material. And when laying at one and a half bricks, they use minvatu, pass, pergamine, felt.
6
To make the roof, you will have a lot of work. The options for the roof of the bath is a lot, and materials can be used different. First you need to make a wooden roof frame, sew the ceiling board, while not to forget to leave a place for the pipe, insulate the top of the construction with thermal insulation materials. At the end, cover the roof by any building material to choose from: slate, ondulin, tile, rubberoid.
7
Exterior construction work is completed, now go to the inner. It remains to make plumbing, electrician, oven, insert windows and doors. Floors, the walls are better made from the board of the lining, though, you can pick up other materials for finishing.
Let the construction of a brick bath is troublesome and costly, but as beautiful when it is in his yard. You can fix health, and just get along and cheered up.
0
1170
