When building a bath, special attention should be paid to the roof, because it is it that will keep warm, protect against rain and wind. The roof of the bath can be built yourself, you just need to adhere to the editing rules and a strictly defined sequence of actions.
1
Determine the roof type - single or duplex, attic or nonsense. For a small summer bath to 15 square meters. M Single Celebrate Roof is suitable. In the absence of the attic ceiling and the roof of the bath is combined. The row roof is harder to build, but it is it necessary for a big bath. If the bath is built with a attic, then first the attic room is built, and the roof is erected above it. The presence of the attic improves the thermal insulation of the roof.
2
Choose the roof material. All materials have a different service life and require a different roof inclination angle. It can be rubberoid (an angle of inclination at least 5 °, service life of 10-15 years), slate (20 °, 30-40 years), metal tile (from 30 °, 50 years), professional flooring (8 °, from 50 years) , Folding roof (18 °, over 50 years).
3
Install Mauerlat - a wooden timber attached over the walls of the brick or stenoblock walls. If the bath is built from the bar, then Mauerlat is the upper log logs. In the logs, do the nests in which the beams of overlaps will be installed. It is important to observe the horizontal beams. Overlapping beams can play the walls of the construction to the distance to half a meter. The size of the vertical section of the beams should be 1/20 or 1/25 from the distance between the supports.
4
In the beams, install rafters or rafting farms, which are rigid bundles from boards, bars or logs. In this case, the cross section of the bar must be at least 6 cm, the logs - 12 cm, boards - 4 * 15 cm. Stropile legs securely secure in the beams, for this, use iron brackets or wooden lining. Fix the rafters with "jams" and connect at the top of the skate bar.
5
Make waterproofing bath roof. Special protective membranes or films lay on rafters without stretching (to prevent discontinuities with a 15-25 cm in temperature) and glue with scotch.
6
Make a crawl cut from a cross section of 50 * 50 mm if the roof is tile, slate or professional flooring. The doom is necessary for durable roofing to the roof frame. The pitch of the crates is 50 cm. For rolled roofing materials on rafters instead of the crate, it is necessary to launch a solid wooden flooring. Attach the roofing material.
7
Place the ceiling bath. It can be panel, tail, flooring. Between the rafters tightly laid the insulation. As thermal insulation, a two-layer film "Armitek" or mineral wool, a layer of insulation must be from 10 cm. Between the ceiling sewing and the beams of overlaps, launch a layer of vaporizolation.
So that the roof of the bathhouse served for a long time, choose high-quality materials. Wood must be well succumbed and processed by means of moisture, fire and bugs. All materials used should be fireproof.
0
1305
