Who does not like a bath? You can rarely meet a person who despises herbal flavors of the steam, the smell of fragrant broom, nicely burning couples and sincere conversations with friends about life. In addition to the pleasure of contrasting procedures and complete relaxation, you can strengthen and even restore your own health. The basis of any bath is, of course, the stove. Here from her, sweet, we will dance today. Brief instructions on how to build a bath oven, expects you lower.
1
For the construction of such a useful construction, we will need:
brick for stoves;
clay;
sand;
water;
chimney;
asbestos cord;
metal doors;
damper;
grille grate;
water tank.
2
First, prepare a solution from sand and clay. Proportions of materials for the knead 1: 1: 4. As you guessed, four parts are water. From the homogeneity of the solution and the quality of clay will depend on the strength of the bath furnace.
3
Now you can proceed to brickwork. To ensure the same width of the seams between the stones, each row of masonry is first laid out dry. Thus, we will pick up bricks, the same in size.
4
Then lay out the desired amount of solution to the place with the help of a cell and recall it. Pre-moistened brick install per solution. Handle Kelma, slightly tapping, the stone needs to be satisfied to a 5-millimeter seam thickness. Excess solution is removed. The subsequent brick is laid by the tonchochka side to the previous one for dressing the seams of masonry. The level of each row is checked by the level.
5
Grille grate, flue and confusion doors are mounted simultaneously with leading brickwork. Additionally, the doors bind to a soft wire, the ends of which are laid in the seams. Before boarding the door, it is worth covering the perimeter asbestos cord.
6
The built-in tank for heating the water is placed with a mixture of clay and asbestos. It will ensure the absence of cracks in the stove with thermal expansion of the container. Lastly, a metallic smoke tube of a bath furnace is installed. Its laying is conducted through the ceiling and the roof of the bath in compliance with all the rules of fire safety.
The first torture of the finished stove can be carried out only in 2-3 days. Before that, the masonry must be completely dry in natural conditions. Good luck to you and health!
0
3250
