How to update the old kitchen set

Favorite kitchen headset completely lost a presentable look, and the purchase of new furniture is not provided for by the budget at this time? There are several ways to help change the usual kitchen almost beyond recognition.

Adhesive tape. The simplest and most affordable version of the cuisine is the "old woman" - to leave it with a special self-adhesive film. Such a coating is quite practical - it is characterized by increased resistance to moisture, mechanical / chemical impacts and temperature drops. By choosing vinyl self-keys with imitation under the brick, natural stone, aged tree, ceramics or skin, you can transform your old kitchen set in a matter of hours!

Kitchen furniture flushing with self-flick film is performed in such a sequence:

First of all, measurements are removed from facades, side surfaces, open shelves, drawers and other elements headset that need to be updated. According to the data obtained (taking into account 10-15 cm per battery), the film material is purchased.
Then dismantle the accessories and remove the necessary parts. All elements are thoroughly washed in warm water with the addition of a degreasing agent, after washing, they wipe dry.
The detected irregularities and cracks on the furniture are neatly cleaned with a fine sandpaper and covered with a putty or ground-filler. It is important that all working areas are clean, smooth and dry - otherwise, during operation, self-tier will begin to be covered with bubbles.
Next, perform the cutting film according to the remarble measurements. Cutting material is performed on the markup with a sharp knife or scissors.
Gradually, removing paper protective coating from the insole, the film is neatly applied by the adhesive side to the working furniture part.
Each glued fragment is thoroughly smoothed by a plastic scraper in the direction from the center and to the edges. Small bubbles pierce the needle's edges, more extensive swollen areas are caught with a stationery knife and also rolled it.
After the salary, all dismantled elements headset return to its places. If necessary, old accessories replace new.

Wall mural. You can also use laminated wallpapers on a self-adhesive basis to update facial furniture parts - they are resistant to external influences and perfectly carry wet cleaning. The algorithm for gluing such decorative wallpapers is practically no different from the above-described film application technique: measurements are performed, the blanks are cut, the prepared fragments are glued, air "pockets" are eliminated. To extend the life of paper wallpaper, they are twice with a transparent varnish.

On a note! When choosing decorative photo wallpapers, take into account that monophonic stroke materials will definitely "copy" all irregularities and tubercles on the facades, but they will delicately hide them.

Decorative inserts. It often happens that after repairing in the kitchen, the old headset disharmoniates with a new setting. In such cases, it is advisable to update the furniture with the help of decorative inserts, echoing with the new interior of the room. For such a redesign, a wall ceramic tile is perfect. All work is conditionally divided into several stages:

first dismantle the doors of the cabinets and carefully clean the working surfaces, if the facade is desired, the paint can be covered with a suitable shade;
then, pieces of ceramics or solid tiles are glued to the doors using silicone sealant or cement glue;
for accuracy, the tile appliqué is complemented by the framed from the decorative molding.

Replacing facades. Replacing old facades with new ones will help more radically change the usual cuisine. For a modular headset, you can purchase ready-made details, for more rare furniture they will have to be ordered. Your task is to determine the color and material for the manufacture of parts. As an economy, most often choose inexpensive wood or chipboard, as part of a more solid budget - an array of a valuable tree or MDF. The furniture assembly is better to entrust the team of specialists, however, if you wish to cope with the installation of new doors, you can also.

Replacing the table top. Countertop - one of the elements of the kitchen group, which is subjected to the greatest wear in the process of daily operation. A variety of products are often cut on the surface of the countertops, they immediately put hot frying pan and pans. MDF products are considered the most simple in terms of installation, in addition, such models successfully resist high humidity and wear.

As you can see, there is no difficulty in updating kitchen heads. It remains to choose the most suitable from the proposed options, based on the time allotted for redesign, and the possibilities of the family budget.