How to put a laminate on the wooden floor

Perhaps the most important element that allows you to pay high quality laminatecapable of listening for many years is the preparation of the basis. If the flooring is required to put on the wooden floor, it is necessary to pre-fix the flooring to remove the screens and eliminate their mobility. On the main stages of the preparation of the basis and actually laying laminate And it will be said later.

To eliminate the violep of the flooring and reducing the mobility of the wooden floor, which served a long time, it is recommended to completely go through it, removing the boards, replacing the worn lags and re-fixing the flooring more suitable for this purpose by self-draws instead of the former nails. This procedure although mainportsBut very effective. The creaking arising from the movement of the boards relative to each other, "cured" by bonding them with self-threads screwed at an angle, drumming on the border of the holes, which are clogged with wooden climbing or smoking between them of small wedges of wood.

To optimally prepare the base for laying, it is necessary to align it using materials such as plywood, sheet chipboard, or similar, since quite high demands are presented to surface irregularities: on a plot of two square meters, they should not exceed 2 mm. In the case of significant extensions and / or failures between wooden floors and additional coating (for example, plywood), auxiliary supports are installed. After installation, the surface is processed using a manual cycle or the corresponding mechanized aggregate.

When laying laminate On the wooden base, the gasket under its waterproofing film is unacceptable, since it will prevent ventilation, which will lead to accumulation under the film harmful to the wooden floor of condensate. But to bed the substrate that will not only smooth out small irregularities, but also serves as an aroma, it is simply necessary. The substrate can be many species: polystoinoethylenewhich over time a bit it is planted; Cork - possessing excellent flavoring and operational properties, but relatively expensive; Or another - the question is rather financial capabilities of the host of the room. There are rolled or sheet cutting substrate. The second option is more suitable for rooms designed for more people, since the maximum number of joints improves ventilation. The substrate is laid by a smooth layer, and the joints are sampled for their fixation by painting scotch. It is convenient to lay out the substrate not immediately, but gradually, as the flooring is styled.

After completion of the procedures described above, you can move directly to laying the floor covering. It is recommended when used as the basis of a wooden floor to apply to the achievement of optimal strength and reliability of traditional laying, avoiding diagonal. Wherein laminate It is stirred strictly perpendicular to the floorboards. On the perimeter of the room, the stops or wedges are installed, necessary to install the same gap between the wall and flooring boards. The first row is laid out from left to right by bonding end locks. The following rows are further stacked.

Pretty simple laying technology laminate On the wooden floor you can master yourself or entrust this business to professional builders. With full compliance with the technology and the use of high-quality materials, the flooring will be happy to delight the happy inhabitants of the dwelling.