Creaks a staircase what to do

Creaks a staircase what to do

Each of us heard the staircase creaks. The reasons for the appearance of this sound can be the most different: poor-quality installation, wear of structural elements or insufficient care. Fortunately, there are several methods by resorting to which you can get rid of an annoying screer.

1
The easiest way to get rid of this problem is the repair of stairs with nails. To do this, determine the problem step and drill two holes of a small diameter in it. Drink nails with a length of 60-70 millimeters so that their caps are drowning in the thicker of the tree. Get out the deepening with a putty, and after it dries, completely pollipping and cover it with a protective varnish. This is necessary in order to hide the traces of repair. The use of self-tapping screws instead of nails will allow you to forget about the screet for a longer period.

2
The following method is the use of wedges. Remove with a sticking decorative lining and thoroughly wake all the slots with a special adhesive composition. After that, score wedges in them made of wood or metal. This repair method will help you stabilize the step and eliminate the sounds arising from friction. During the work, be extremely neat and attentive, since an overly strong wedge can cause the deformation of the entire structure.

3
If the design of the staircase provides convenient access to the back of the march, you can strengthen the scripting stage below. To do this, you will need construction corners that can be purchased in a shopping store or make yourself. When they are assisted, connect the opposite direction to the stairs with the base of the stairs. To completely eliminate the violin on each stage, it is recommended to mount at least two such corners. As a fastener, it is best to use a tree screws, but conventional nails are suitable.

4
If your staircase was made with the use of wedges, but over time they loosened and sticking began to creak, only their replacement will help you. To do this, prepare new elongated wedges, abundantly lubricate them with PVA glue and carefully sweep under the expense, pre-removing old. After putting something heavy on the step and leave in this position until the glue drying is completely drying.

Now you know how to get rid of the annoying screenshot of the stairs. And to avoid its appearance, keep stable humidity and temperature in the room. The correct combination of these two factors will completely eliminate the possible deformation of wooden structures.

Add a comment

Your e-mail will not be published. Mandatory fields are marked *

close