Washing machines have long entered our lives. It is impossible to introduce a modern apartment that is not equipped with this useful thing. But what if your favorite "washer" began to leak or give failures? One option is to try to repair the washing machine yourself. About how to disassemble it to get to the broken item, we will talk.
1
To disassemble the "washer", you will use the following tools:
screwdriver;
pliers;
the key is 19.
2
Disassembly of washing machines should be started from the top of their casing. Using a screwdriver, unscrew the screws that lock the upper cover, and remove it. For removal, push a slight on the cover in front and push back. The lid should be held.
3
The next step is to remove the washing machine control unit. To do this, remove the dispenser for powders and unscrew the screws, which you received access to. To remove the dispenser, just with a little effort click on the central partition and pull it forward. Disconnect all wires connected to the block and remove it. Do not forget to disconnect the wire connected to the door lock.
4
Remove the front of the casing. To do this, carefully unscrew all the screws located in the side and lower part of the facial side of the case. Some of the screws can be hidden using a special tape. After turning out all the screws, remove the clamp, which holds the rubber cuff of the washing drum. Holding the pliers, relax it as much as possible using a screwdriver. Remove the bulk hose coming from the water distributor to Baku. In order to make it easily and simply, with the help of pliers, loosen the holding clamps. Strong, but gently pull the hose to remove it. Similarly, we remove all the remaining hoses and corrugations of the drain of water. We remove the clamp, holding the rubber cuff on the drum.
5
Now you do not bother to remove counterweight. Externally, they look like small blocks of concrete and can be located both in front and in the back of the car casing. Serve a counterweight to reduce and complete the exclusion of vibrations arising during the washing process and especially in the process of pressed underwear. To remove them, use the key.
6
Now you can proceed to the removal of the Tan. Look for it at the bottom of the drum. Remove the locking nut and gently knock on the hairpin to drown a tan. After that, remove it from the nest. Also unscrew all shock absorbers. Remove the drum from the casing.
7
Washing machine disassembled separate nodes and elements. Now you can proceed to a detailed inspection of its parts and troubleshooting.
Following these ordinary tips, you can independently disassemble the washing machine and identify a malfunction, which will allow you to save a little and, more importantly, get a new experience that can be useful to you at any time.
Share advice:"How to disassemble a washing machine"
1
6582
