How to change the gas stove

Acquisition of a new gas stove, like any other household appliances, is a significant event for each family. And many people think about the fact that its connection can only produce specialized services. But it is not. First, the warranty service does not matter anyone who made the connection. And secondly, this process is quite simple and requires minimal safety abilities. The main thing in replacing the gas stove is not to fuss and follow the basics of safety. And then you will succeed at the highest level.

1

Documents and applications to change the gas stove

There are cases when the gas stove does not need to buy himself, it is possible to replace it at the expense of the city budget. You can count on free replacement, if:

• You live in a gasified apartment house, all the plates in which are located on the balance of Jeep.
• You are classified as a preferential category of citizens, for example, are the recipient of subsidies or have the title of Hero of the Soviet Union and the Russian Federation, the Hero of Socialist Labor.

Change the working slab on your own will not work for free, but this can be done when the device with the device will become critical. So, the replacement process occurs as follows:

• Once a year in the gasified house located on the balance sheet of the housing organization, gas supplies are coming with checking the state of the plates. If the stove is in disrepair and requires replacement, employees constitute a defective statement.
• This document is considered the basis for replacing the device. One copy of the paper Experts leave themselves, the second copy of the slave owner must submit to the management housing organization.
• The management company is the stoves for replacement plates and submits them into the operational control of a specific area.
• After that, it remains only to wait for the queue. Plates primarily change the preferential segments of the population: disabled people, participants in hostilities, poor citizens.

If you do not want to wait for the queue or do not please the number of citizens for free replacement, and want to replace the gas stove on your own on your own, you can simply write an application to the name of the operating management. In this statement, you provide information on how to pay for the slate itself and for its replacement agree from your own funds.

2

How to change the gas stove - instruction

• In order to change the gas stove, specific tools will be required: Gas key number 1; Plumbing key key (can be replaced by rail keys by 22-24 and 27); Flat screwdriver (it may not always be necessary, but it is better to prepare it in advance); FUM RTIA, LOWING thread, palaper (any of three options); Paronit gasket 1 / 2'; gas hose required length; ball valve 1 / 2'; soap emulsion; Tassel or loving; Malar level.

• Before the start of all works, it is necessary to overlap the gas crane located in the room. And the discovery of any burner to check whether there is no gas leakage.

• To dismantle the old slab, you will need to unscrew the crane from the crane. This is done with the help of two keys: one holds the crane, and the other is twisted with the other. This action, like all subsequent, is produced with an open window or a window and in the electricity de-energized room.

• The old slab disconnected from the gas pipeline is assigned to the side, and it is best to remove from the room at all. So she tritely did not interfere with the connection of the new gas stove.

• Next, it is necessary to wind the seal on the thread of the crane and the camp of the slab. Regardless of whether the fuma ribbon is selected, the filament of the elbow or paklet, they should be pre-slightly moistened. It is also worth ensuring that the wound layer is not too thick or thin.

• The next step is to connect the hose. It is carried out first to the gas stove, and then to the crane of the gas pipeline. Tightening the hose nuts, both on a Sgon and the crane, must be performed using two keys. It is done like this: a saft / crane is held with one key, and the other efforts are applied to the nut. This method is required in order not to deform the gas pipeline or the inner system of the slab.

• The penultimate step in the process of replacing the gas stove is to check the quality of the hose connection. It is made by soap emulsion. To do this, it is required using a pet and tassels tightly apply it to the connection site and watch for a couple of minutes. If the appearance of soap bubbles is not observed, then everything is performed qualitatively, and you can go to the last step. Well, in the case of the formation of bubbles, it is worth repeating the 5th and 6th point until the soap emulsion is in calm condition.

• In conclusion, you should install a new slab on the required place. Also worth not to forget about the possibility of adjusting the legs. It is required to do, relying on the testimony of the painting level. In addition to the stability of the slab itself, these actions will not allow fat fat into one side of the frying pan.

Total seven simple actions will be required to change the gas stove. And in addition to saving money, everyone will experience a lot of positive emotions. After all, any work performed by the work causes pride not only by the Contractor, but also at the members of his family.