With a gas stove, as with other home appliances, it follows according to the rules of elementary safety. If you have purchased a new slab or have never included the already existing, you need to act carefully and follow a certain order of steps.
1
Find the valve on the gas pipe and completely open it. So you will provide the feed of natural gas to your stove.
2
Consider the designations near the burners: they show the correspondence of burners and rotated relays. Select one hardware that you will turn on. Light a match, bring it to the divider, turn the desired relay counterclockwise to a quarter of turnover. Adjust the flame to suitable size. Make sure the fire is blue. If the flame is orange, turn off the burner and clean it or call the wizard for this procedure.
3
The stove with the function of the electrojection is turned on otherwise. The semi-automatic system works like this: click on the ignition button (usually located in one row with burners, slightly left), is sparking on all burners. It remains only to rotate the selected relay. On the stove with auto-oghig, you need to press a little relay, and then turn it left.
4
To turn on the oven, open the door and find one or two holes at the bottom, which lead to the burner. Turn the relay, then bring a lit match to each hole (it is more convenient to use fireplace matches or long toothpicks). The flame should catch fire and spread over the entire surface of the burner. If everything happened this way, close the door and expect the heating of the oven to the desired temperature. Operation of the plates with an electric fuel is much easier: turn on the oven in the same way as the external burners.
Answers to most issues on the use of gas stove can be found in the factory instruction. If you can not turn on the slate yourself and you do not find the troubleshooting methods, call the employee of the gas service so that it checks the entire system.
0
2306
