If you take care of the arrangement of your country house in advance and installed the gas column - you remained the last step towards warm and cozy life. And this step is to configure and properly turn on the column. To gas column earned, you will have to make a few simple actions. First, make sure that the gas tap that gives gas to the column is open. Then open the crane that is responsible for the flow of water into the tank of the water heating unit. The inclusion or ignition can be carried out in only three ways that depend on the design features of the column.
1
The oldest way to ignite, covered by gas speakers - manual. This method is already going down in history and today is not applied by manufacturers. In the very first columns, the phytil was taught by ordinary matches. To start such a column first, open the valve, overlapping the water supply, then open the crane that provides gas supply to the fittel. Fit wick and open the gas supply valve. The main disadvantage of such columns was the absence of any protective mechanisms, for example, in the case of a sudden drop of water pressure in the column system - ignorant wick everything will still be lit, and the column will continue to foul fuel. This ignition system is extremely simple, but it will require certain skills from you. Such columns use home very undesirable.
2
More modern system - Piezorozhig. To ignite such a column, simply click on the button responsible for the arson of the phytile located in the combustion chamber - the piezoelement will provide a spark that set fire to the wick. These columns include Junkers WR 10-2 PV, Bosch WR 10-2 P Minimaxx-2, Nevalux 5111 and others. They use the principle of transforming mechanical action to the spark, the capacity of which is enough for arson of wicking. To ignite the main burner, open the gas supply faucet. In the case of the return of the regulator to the original position or termination of the water supply, the phytil will still burn further. Like burners with manual ignition, these structures are considered too "voracious" due to excessive gas consumption.
3
Thanks to the abundance of choice, today you can purchase a gas column of absolutely any modification. In order to increase sales and simplify the process of using the burner, some manufacturers, for example, Rihters, Ariston, NEVA, have significantly improved the work of their complexes. It was developed, and then put into production fully automatic burner ignition system: both ignition wick, and the central burner is lit automatically without human intervention. For this, a special turbine was established, activated by strong water pressure. After launching the turbine, all the basic functions that were performed manually were made are made offline. The disadvantage of such systems is one - in a variety of residential buildings, water is fed under low pressure, which is not enough for the full functioning of the turbine. Activation of such columns and adjusting the heating temperature of water can often be carried out using a conventional remote control.
4
If your column has failed - immediately contact the gas service. DIY repair of such equipment is categorically prohibited and may entail very sad consequences. To avoid this, periodically examine the state of the chimney and do not allow it to be clogged.
Modern gas boilers are absolutely safe, in contrast to their early predecessors. Most key processes related to their proper operation are simplified and do not require additional learning from the user. But despite this, do not forget that any gas apparatus is a source of potential danger.
1
1512
