About 90% of washing machines break due to a negligent attitude towards them, and not because of the fact that the details were worn. The main reason for breakdown - pollution. To get rid of them, do not necessarily call the wizard or buy expensive advertised funds. It is enough to carry out regular cleaning of the unit from external and internal pollution - and it will last sufficient period of time.
1
Carefully read the instructions attached to this technique, so you will know exactly the device of your unit, the norms of cleaning, care and operation processes.
2
External care for the washing machine is to carefully remove contaminants from its entire surface. It is necessary to do it with the help of a dishwashing agent applied to a soft sponge. Treat with soap solution to the entire surface of the unit and wash all the contamination using warm water.
3
The powder container has a tendency to accumulate balances of detergent used. This contributes to the fact that the supply of powder or rinse is not dosed properly, plus a dirty powder acceptor is a good place to breed mold and fungus. Gently remove the tray for the washing powder from the machine, thoroughly rinse it under running water with a detergent or chlorine-containing agent with a toothbrush or sponge. The hole where the powder receiver is located, wash with the same method with the same method as the tray itself.
4
Pay special attention to rubber gaskets (cuffs) near the door, since it is precisely in these parts of the washing machine, which is most often due to constant high humidity, mold is formed. Clean all the fine slots with a toothbrush and detergents that do not contain chlorine, since rubber parts negatively perceive all the effects of this substance - chlorine corrosive.
5
The drain pump filter is designed for "screening" of all contaminants that can be in our things. Before opening the filter panel cover, put a shallow tank for collecting water from the emergency drain hose. Open the panel cover, drain the water residues and remove the pump. Clean the impeller from all accumulated uncleanness. If this is not done once every two or three months, he will score and will not pass through itself, which is fraught with his breakdown.
6
The pollution of the drum washing machine is manifested by the occurrence of unpleasant odor inside the aggregate. After washing, the machine must be cleaned from the accumulation of moisture, wiping it with a dry rag and leaving for ventilation.
7
From the accumulation of a lime flooring on the drum and heating element, clean the washing machine once every 4-6 months (it all depends on the rigidity of the water of your region). To do this, pour 5-10 packs to the powder acceptor (approximately one glass) of citric acid, turn on the maximum temperature and run the program of the usual washing (without lingerie). The acid under the influence of high temperature dissolves all pollution. The tank, the drum and the heating element are cleaned to the brilliance, the machine in rinse mode everything comes well and get rid of all salts and alkalis residues.
8
In order to spend high-quality cleaning from scale and plaque, you can use the antibacterial agent for washing machines by purchasing it in a specialized store. Cleaning the unit of such household chemicals, follow the instructions for use.
The means for cleaning the washing machine should not be chlorine-containing and abrasive. Do not use hard materials for washing and removing contaminants from the surface of the unit.
0
1178
