The space of its car we often fill with your favorite musical compositions. It is a pity that the factory audio systems sometimes do not allow us to do this fully. Autolokers have alternatives in the form of automotive radio tape recorders with USB output, MP3 adapters or MP3 modulators.
1
If a USB output is provided in the radio, the connection of the flash drive is not difficult. You need to insert a flash card into the connector, and the radio will automatol will automatically read the contents of the carrier.
2
MP3-modulator is connected through the car cigarette lighter socket. You need to pull the cigarette lighter and insert the modulator into the released connector. Depending on the type of the modulator, find it a wave in the search for the radio frequency of the FM receiver.
3
Connecting MP3 adapter. MP3 adapter is a device that is displayed as a removable CD player. Remove the network from the nest. Connect the standard magnet with the adapter using the existing cable. The instrument connector is connected to the CD changer connector on the rear panel of the radio. Stretch the cable to the place where your MP3 adapter will be conveniently located.
4
The next time you turn on the vehicle ignition, the adapter will start automatically, and information about the playing track will appear on its display. The MP3-adapter is controlled from the buttons on the instrument panel or from the remote control, and the reproduced sound of better sound.
Autolokers prefer all the same MP3 adapters. The price of such an adapter is slightly higher compared to MP3 modulator. But the first exists additional features, such as the possibility of recharging a mobile phone via a USB connector.
Share advice:"How to connect a flash drive to a radio"
0
3394
