The car for Russian drivers has not been so long ago from luxury means of movement. However, technical progress continues to delight all new and new achievements. One of these pleasant and useful achievements has become a rearview camcorder installed in the car, which allows you to be placed with a reverse course without any problems and improving the review behind the car. And even if the camera is not provided in your car, it is easy to connect it.
1
Rear view video cameras models Great set. In a specialized store, you can purchase a chamber with the installation kit and instruction. Oriented with the choice of manufacturer, price, price reviews, seller recommendations, connection method - wired and wireless, etc. Only the appropriate model can be used as a rear view camera, it cannot be frontal, do not confuse when you buy. To install and connect the camera, you will need car radio with a good monitor and the possibility of connecting the camcorder.
2
Wired camera models have three wires: black - it almost always means "minus", red - "plus", yellow - for connecting and transmitting the video signal itself. Place the camera in a convenient place on the back of the car, preferably in the center. For example, you can set the camera under or over the number. In some models of cars, a deepening of the camera is specifically provided, even if it is not included in the full car complete set. Do not install the chamber behind the glass of the car, it is meaningless, because The image will be glare, it will not be visible to the lower boundary, but a lot of unnecessary parts will appear due to the large viewing angle.
3
Wires on plus and minus connect to the corresponding wires of the reverse lamp. From here it follows that the review camera will work and transmit video only when the reverse transmission is turned on. Most cameras are designed only for short-term work if you connect them to a constant power source, this will automatically reduce their service life. Do not confuse the wires when connected, as this can output the camera or the radio, or both instruments simultaneously. When the reverse is turned on, the camera will automatically turn on and transmit the video to the monitor, so no additional manipulations need to be performed. Also automatically the camera will turn off when changing the stroke.
4
The yellow wire transmitting the video signal is connected to a chamber with one connector, and the other to the appropriate input on the radio. Determine the desired connector will help instructions for the radio, if available, or focus on the inscription: Video in. The wire from the camera is preferably stretching under the trim in such a way as not to damage it with the further operation of the car, for example, on the floor along the car side.
5
If you have purchased a rear view camera with a wireless signal transmission, connect the camera in the same way to power from the rear light. Video signal transmitter Connect to the camera, and the receiver to the radio, using the same video in connector. After collecting the entire system, it is a thorough feed wires, check that you did not confuse anything in the connection system, and check the efficiency of the instruments.
Rearview video cameras transmit an image in a mirror form, it's easier to perceive the picture - this is how you are used to seeing it in the rearview mirror. Even if you initially will be unusual, very soon you will appreciate this invention.
Share advice:"How to connect a rear view camera for radio"
0
2324
