How to connect heating mirrors on vaz

VAZ cars in most cases are produced with side reflectors that do not have heating functions. In the cold season, this is a little spoils the pleasure and impression of car enthusiasts from the operation of the vehicle. Therefore, the installation of elements with the possibility of heating is simply necessary in our climatic conditions.

At the beginning of the replacement of side mirrors, the VAZ vehicle should be prepared and dismantle the upholstery of the front doors, then - thresholds. We pave electrical wires. Carefully pull the regular mirror. In most cases, it bursts and crumbs, so you need to be extremely neat.

At the next stage, disassemble the mirror. Remove the self-tapping screws holding a decorative lining. Take a screwdriver and pry the mirror element, while paying attention to its condition. It is necessary to be extremely careful and work in gloves so as not to cut down. Using the scotch, skid the plane of the mirror to avoid fragments of fragments.

From the housing neatly and slowly pull the hinge mirror of the loop, which is done from the rope or belt. To disconnect the hinge loop, we throw on it and a sharp movement pull on yourself, keeping the mirror body.

We start connecting the contact details themselves. At the same time, it is necessary to make sure that the wiring is complete. Four wires must be connected on the right and left mirrors and two to the mass. Wires need to be held in the gap springs lever tool. We collect a mirroring device by fixing it to the heard click, while it should be slightly pressed on the central part.

After establishing a new mirror device, we skip the wire inside the doors of the vehicle. We bring it to the rear window heating button. Remove the minus battery terminal and unscrew the safety unit. To avoid some overload onboard network, we hold the wire here. We collect a side view mirror after completing work with wiring and check its performance.

As a result, the time spent and the actions undertaken we have a heated mirrors at the WHA. Now forward to suitable weather to complete the inspection of heating of mirrors, made with his own hands.