Modern cars are already equipped with alarms, but on domestic can be installed on their own. Installation on the VAZ will take a little time, but it can save from theft.
1
The first thing is established is the LED. It goes along with the alarm. Most often it is fixed in the corner of the windshield.
2
In a convenient location in the cabin there is a block of alarm. Most drivers are hiding under torpedo, but it depends on the specific car model.
3
Armed with a tester or a call, you need to find wires that go to the turn signals, + 12V, ignition and door contacts, as well as a central lock, if available. In the case when the central lock is missing, the entry of the doors is removed and the electric drive is installed. According to the instructions, it connects to the alarm itself.
4
Siren is installed under the hood. You need to select a remote and necessarily a dry angle. It must be abolished. The wires are closed as follows: black - for mass, red - to the alarm unit. Do not forget about safety: bare wires need to be coated with an insulating ribbon. Reduce the chances of the hijacking of the engine lock.
5
Included with the signaling there is also a VALET button. It performs the programming function or disable device. It is used when the alarm fails. This button is installed in a secret place. Its settings are made according to the instructions. In cases where the alarm breaks, changes to the settings are made using this button. You can turn off the signaling at all, leaving only the operation of the central lock.
It is necessarily recommended to check the performance of the signaling after installation. Do not save on this device, because alarm is protected from car theft.
0
2047
