How to install a VAZ engine on Luaz

The SUV of Ukrainian production LUAZ is pretty reliable, compact and economical. However, its main disadvantage is considered a small power engine that suits the speeds of the passenger car than for a large-sized machine. You can correct this deficiency, reinstalling the engine from a vase to LUAZ.

To install in LUAZ, it is best to use the classic from the vase - the power unit. In addition to the fact that these cars have similar constructions, there are special transition plates that are used when replacing the engine. And the PPC Loise perfectly corresponds to the Motor of Zhiguli.

First of all purchase the necessary inventory. Select and buy an aluminum transition plate to install the motor. Ideally order such a plate at the factory.

Pull out the engine from Loise. Remove regular supports, flywheel and clutch cart from the VAZ engine. Collect it on the transition plate. Installing additional supports on Loise is not needed. Please note that mainly transition plates provide for the use of LUAZ studs.

After installing the engine, do not remove the winch slings. In the loop, install the plate on the crankcase, then fix the motor on the supports. Check the clutch. Collect the radiator from Tavria with the electric fan from the Zhiguli seven model. Install it on the left side of the new motor.

Take a flexible rubber air duct and, with it, swipe the air to a new radiator from the falseradiator grille. Upper coolant pipe Install inside duct. At the bottom attach the drain plug and place the bumper. You also need an expansion tank from the "eight", which should be fixed to the left of the main clutch cylinder. Bottom connections Connect to the pump.

Hydraulic brakes should be moved to the right. In order, he did not climb and the water did not fall into it, connect the intake valve to the air filter of the motor. Put the crankcase protection.

Replace the crankshaft to more reinforced from steel. Use for such a drive belt from M-412. Oil filter also replace to a more advanced - low Champion F101.

Station clutch VAZ engine leave. The release bearing from Loise is combined with it, but it can break from time to time, since the load on it will increase. To avoid this, set the LUK clutch.