Usually, to drown out the engine, you need to turn the key counterclockwise and pull out the ignition lock. But sometimes problems happen in the car, in which such an action does not lead to the desired result. In this case, there are several ways to drown out the engine.
1
You can clog the end of the exhaust pipe, or stop the air intake in the carburetor - it too reapproved the mixture and leads to the engine stop. The first is convenient because the exhaust pipe is available, but be careful: it can be very hot. In the second case there is a disadvantage: high-performance filters make it impossible to use this method without removing the filter. When using both methods, the engine can be flooded with fuel, and can pour the incandescent candle. Since the carburetor is filled with fuel, the restart of the engine will be difficult.
2
You can overlap the fuel in the engine. In some cases it is difficult to do. It is inconvenient that the engine will not stop immediately because it continues to work until the fuel is consumed in the fuel wire. The disadvantage of this method is that the lack of fuel drops the mixture, which is bad for a candle of incandescent.
3
You can, of course, stop the flywheel - in this case, the engine will stop immediately. Some drivers use their shoes or handle tool for this. And more experienced drivers brake the flywheel with a finger (but it is not recommended for engines working on full revs). It is convenient for the fact that the motor will stop immediately, and the candles of incandescent will not be filled, but requires a certain skill.
4
If you have a diesel car, then the motor is muffled by overlapping fuel! On passenger cars for this it is necessary to translate the key in the ignition lock to the desired position. After that, electric valve will work, which overlaps the supply of diesel fuel line. It is necessary to take into account that turbo-timers are installed on modern diesel engines, which provide forced operation of a diesel engine for some time after it is turned off.
After the engine is forced to turn off, it is necessary to find out the cause of problems and eliminate them. Very often in modern machines, the cause of everything becomes an incorrect key chain with alarm system and the central lock.
0
2245
