How much oil is needed in the engine

All car owners care about the state of their cars. And absolutely it does not matter - a new car or with respectful mileage. One of the most important elements responsible for the long-term and impeccable operation of the engine is the engine oil. It is from oil that depends the service life of the power unit of any vehicle. Number and quality The oil is not equally for various cars.

If we talk about the passenger cars of the domestic car industry, then for high-quality lubrication of all engine nodes requires about four liters of oil. This average magnitude for 1.8-2.4 liters engines. Naturally, more lubricating substances are required for larger engines. General recommendations of specialists are as follows: Fill about 3.5 liters using probe, determine the oil level. If the level is insufficient - carefully draw 200-250 grams and check again. If the oil is missing again - repeat the procedure.

For foreign cars, with motors of 1800 to 2400 cubic centimeters, requires about 4.2-4.3 liters of oil. But you do not have to buy five liters, it will be enough and four. Conducted this is the fact that it will never be able to merge the spent oil by 100%. It will remain on the inner surfaces of the engine housing, gears and cylinders. The level of the oiled oil must be checked by probe.

When purchasing a car, try to find out which oil it was flooded into the engine earlier. If there was synthetics there - pour it if the semi-synthetica is the same. Mixing various types of oils can cause expensive repair of a power unit. If there is no possibility to find out the brand of flooded oil is not - travel to a specialized station for complete cleaning and washing the engine. There you will fill new oil.

Oil replacement is always accompanied by a replacement of the oil filter. For draining testing from the engine compartment Park the car on a flat site. Open the plug plug, then unscrew the screw plug from the pallet. Drying oil, unscrew the fuel filter. To quickly dismantle this item, use a special tool. The puller acquire in advance, it is not expensive, but he will be able to save you a lot of time and strength. When the old oil stops flowing, tighten the plug, install the filter and fill the required amount of lubrication. For the fill, use the watering can, if it is not - the upper part of the plastic bottle can come to the rescue.

When the oil level in the motor reaches the norm, start the car. After 5-7 minutes of the engine operation, drag it and check the oil level again. If the level is insufficient - accurately some more.

Now you know how much butter needs to be poured into the car engine. If you are tightly confident in your capabilities - boldly take it out if you think that you will not succeed in yourself - contact a specialized station where the oil is inexpensive and quickly and quickly.