What is the most important thing in the car? Of course, the engine - it is from his reliable job depends on how the car will behave on the road. It is necessary to monitor the state of the motor constantly, and most importantly in this business - to top up the oil to the desired level.
1
If the oil in the engine is not enough, then it is exposed to strong overheating and as a result - the wear of the details. The engine oil should be as much as indicated in the technical documentation on the car.
2
To pretend the oil, you first need to determine its level in the engine. Oil level Check with a motor disconnected. This can be done or before starting the machine, or 10 minutes after its complete stop. To correctly check the oil level, the machine must stand on a flat horizontal surface.
3
To check the oil level in each machine in the subcontrol space there is a special oil dipstick. It has marks that show the allowable minimum and maximum oil values \u200b\u200bin your car engine. Before checking the level, get the diploma from the neck and wipe it with a rapid so that it becomes dry. Now lower the dipstick back in the neck and take again. Look at the level of the oil that will be visible on the dipstick.
4
If it is lower than "min", then plot the oil through the neck of the oil-tapping hole, using the funnel. Do not leut a lot of oil at once so as not to fill. It is better to do this for several techniques, every time checking the level of the dipstick. The level of the valued oil should be greater than the MIN mark, but less than the "Max".
5
Tighten the oil into the engine only the type that it was covered in it initially: mineral, semi-synthetic or synthetic. How to determine the type of oil, which should be in the engine of your car, you also You can find on our website.
If you do not be lazy to check the oil level in the engine and add it on time, then your Iron friend will serve you faithfully for many years. Good luck on the roads!