To improve the running characteristics, the car is made by car. When the vehicle is moving at a speed of more than 100 km / h, the driver will notice the work of this product, the car will be pressed against the road. This part of the car will strongly decorate your car. The body kit will give a modern and sporty look. Such a decoration for your car you can do yourself in the presence of strong desire. So, let's start making a body kit on a VAZ car.
1
Remove the bumpers from the car and the good it is mine to be perfectly clean. We come up with the design of the future body kit, draw a drawing on paper taking into account sizes. What are the bodies on the VAZ, can be easily viewed on the Internet and choose like it, if you can't come up with yourself.
2
You need to know how much you want to make a bumper below, everything is accurately washed, so that the earth does not touch the ground. Take into account where there will be places for grids (if you are installed). Then the center of the bumper is gluable by painting tape, the foam on top of glue and glue the foam and cardboard to the bottom (we set the desired form of the future body kit). Empty spaces between foam filling macroflex.
3
When the macroflex finds, give the desired body shape with a special hypochematic knife and a saw. The resulting product is wrapped with a scotch with painting, without sorry. Top winds are wrapped with ordinary foil, well smoothed it well to be as few irregularities as possible. The next layer will be epoxy resin and fiberglass (to make such a job better in rubber gloves). Let the resin grabbing, and again repeat several times the procedure for applying resin and fiberglass.
4
Fiber needs to be laid out exactly. We are waiting when all the layers are sacrificed and make the first fitting of the body into the car. Then disconnect the bumper and the finished blank, we remove the foam. The edges of the bumper, where the workpiece will be glued, clean, then glue them with scotch. Now the body kit with a bumper is wrapped with fiberglass, and with top-with epoxy.
5
After all this, neat and time-consuming work begins. With the help of putty, primer and grinding, body kit should become smooth and smooth. In the end, it remains only to paint and dry this product. And you can roll it on the car.
The whole process of body manufacturing will take a long time, but the VAZ car will look cooler and attract attention and envy other owners of the same brand.
Share advice:"How to make a body kit on the VAZ with your own hands"
0
4297
