Each owner of the Vaza may face a problem when the hood discovery cable is broken. From such a situation there are two exits: you can contact the service, but it is unknown, as for how much it will be done, therefore it is better to solve the problem on your own, with minimal cash costs.
1
We define with the breakdown - quite rare, but sometimes the cable breaks down from the salon lever. Then for the opening you need to pull the cable from the car's interior. Much more often, the opening occurs in the open space. In such cases, further actions depend on the specific model of AvtoVAZ.
2
Open the VAZ-2108 hood and subsequent modifications of the family to 2115 inclusive. The most practical way is from the bottom of the car. You don't have to drive the machine to the flight at all, it's not necessary to raise one wheel to the jack. Next, we turn off the protection against crabs (if any) and the raincoat from the spars. The hand is reached by the top of the "TV", grip on the lever and pull to the left. If it did not immediately come out - we try to simultaneously pull the hood up and down.
3
On Kalina, the bottom to the castle will not get, you will have to make a hook at the end of a suitable wire and torture happiness through holes in the front grille. Perhaps you will have to sacrifice the plastic detail, but it is much cheaper than the repair of the hood itself, and it will not be changed.
4
In the design of the factory bumper VAZ-2110 there are two large air intakes. The hand leaked to one of them falls between the crate and the radiator, where the end of the cable is and stretches. When the cliff occurred directly on the castle, we take a screwdriver and davim the springs on the ear.
In order for such problems to appear less often, it is necessary to follow your car often, in particular - to lubricate the cable and locking the hood lock. In conclusion, video on how to open the hood on the "classics" (VAZ-2101 ... 07).
0
2395
