Car hood lock reliably locks the hood cover. The closed lock blocks the engine start. With the difficulty of operating the lock, it is necessary to carry out a repair associated with its regulation.
1
To adjust the hood lock, you will need: wrench, screwdriver, oil for lubrication.
2
If the closure of the hood requires significant physical effort or a closed hood rattling and vibrates during the movement of the car, in this case, it is necessary to adjust the length of the valve straw. Discover and secure the hood. Using a wrench loosen the lock nut. Unscrew the rope with a screwdriver for 2-3 turns and fix this position, tightening the lock nut. If after this, the opening of the hood is also hampered, it is necessary to carry out additional adjustment of the lock.
3
When the hood is closed, there is a strong blow with a metal knock, then the position of the receiving part of the locking device is adjusted. Fastening bolts are weakened. The lock latch moves horizontally, i.e. left or right. Fixing the latch, the bolts are tightly tightened. Be sure to check the closure and opening of the hood to which nothing should hinder.
4
If necessary, each procedure is repeated until the easy and free closing and opening of the hood lock has been achieved. In mandatory after the adjustment activities, the lock mechanism is lubricated with liquid oil. The oil prevents the locking of the castle in the cold season and protects against the appearance of rust.
With the right and timely regulation of the hood lock, unpleasant situations associated with the lack of access to the "insides" of the car can be avoided. A good castle will prevent theft and damage to the equipment under the hood.
0
1441
