The central lock in the machine is a device capable of functioning both independently and with a security system. When using the mechanical center lock, you need to close the driver's door key manually. When working with alarm (electronic central locking), all locks will be closed using a key fob. Install the central lock in the car can be independently, the scheme is quite simple.
1
The central locking is a car auxiliary device that provides additional comfort. So, with the help of one pressing the button on the remote, you can unlock all the doors of the machine. In modern vehicles, the central locking can also open the trunk, hatch, fuel tank and activate the windows. Before proceeding with the installation of the system, you need to purchase a set of central locking, door pistons, wires, boards, drill and other small instances.
2
For security reasons, disconnect the terminals from the battery. Remove the upholstery of the doors. To do this, you will need to unscrew the screws under the shelf, then it is possible to remove the handle. Only then remove the trim. Do not forget about the latches, which are located on the edge of the castle, as well as about all other screws located on the door.
3
Next, it is necessary to choose a place to install. Experts advise you to choose the left lower angle, in which there is no likely that the descent glass will interfere with the central locking.
4
In each door, we set the activators of the central lock, they are attached to them with self-tapping screws. Attach the craving that goes in a set with a central lock, to the standard car vehicle.
5
Wires from activators (all of their 4 pieces) should be paved to the central locking unit. You can do this with small plastic homutics. The "track" every car enthusiast chooses himself, according to his car model, but it is not worthwhile to conduct wires on the bottom of the door, moisture is usually accumulated there.
6
Remove the dashboard. It is under it that the central locking unit is best placed in a hard-to-reach place. Connect to the activator wire block. After that, insulate them and secure it into the door with the help of a tape.
7
Now connect the block itself to the wiring of the car. The black wire of the central lock (minus) we connect to the housing, the red (plus) to the fuse number 1 from the battery side.
8
After joining all wires, be sure to check the device in action. Make sure that all traction work smoothly. Only after you see the serviceability of the mechanism, set all the objects in place.
9
If you want to connect the central lock to the car security system, attach the wires that go from the lock block to the fuse block, which is in the hood of the machine.
The central lock is not only convenient, but also safely. Most of the modern vehicles have this device in the factory assembly. However, connect the independently central lock, as we see, easy. Although, if not confident in your abilities, refer to the specialists.
0
2744
