Cigarette lighter - an indispensable option of each car. Despite the fact that it was created to cure a cigar, now has many features for connecting additional equipment.
1
The cigarette lighter consists of a connector and a heating element, which rapidly when pressing the outer part of the cigarette lighter allows you to open a cigarette or cigar. When removing the heater, it is possible to connect other consumers. Inverter connections, compressors or heaters, players, chargers, car vacuum cleaners and small refrigeration cameras are connected to the connector with the inverter.
2
In some cars, the cigarette lighter is missing or over time ceases to work. Sometimes it is convenient to have several cigarette lighters in the car. After determining the most suitable place on the front panel, a hole with a diameter of 26 mm is made. The cigarette lighter is connected in the on-board network of the car. Plus from the cigarette lighter is connected to the car power cable, the minus wire is displayed on the housing. To illuminate the third wire connects to the overall.
3
If you need to simultaneously connect several devices to the cigarette lighter socket, a splitter is used. The number of additional power points is three sockets that are connected to the cord into the stationary lighter connector.
4
During the operation of the cigarette lighter, do not forget about the rules of using electrical equipment. It is forbidden to exceed the load designed for the cigarette lighter. It is necessary to turn off all devices from the cigarette lighter feeder when the car ignition is turned off to prevent the battery full discharge.
Install the cigarette lighter into the car - very simple and fast. Under all the rules and properly connected, the device will serve for a long time without interruptions.
Share advice:"How to install the cigarette lighter"
0
2331
