Many car owners love to decorate their cars, and one of the most common elements of tuning is neon backlight. Thanks to the low price, availability, the widest color palette, ease of installation, a small consumption of energy, moisture resistance and other qualities, neon backlight firmly settled on top of popularity among motorists.
1
Perhaps the easiest and most affordable way to make the neon backlight of the car is to use in the design of cold flexible neon. They can be decorated with the inside of the car - the dashboard, pedals, the perimeter of the cabin and other elements. Thanks to its moisture resistance, flexible neon will exceed itself and when used as the bottom backlight. It will be best to look at low sports cars.
2
Cold Neon is bent perfectly, so it will be easy to install it on the surface of any form. Flexible neon is fastened with an ordinary super block. Some cords are already equipped with a special adhesive band - that are used inside the cabin. Neon cord is divorced and sticks in the required places of the car, is supplied to the power, which can be carried out both from the battery and be connected to the electric car.
3
The easiest option is to power the backlight inside the cabin - it is to connect it to the cigarette lighter using the inverter. One inverter on 12 V can feed five meters of neon cord. Sold to the wire connector, and connect the neon cord to it. The design of flexible neon can be absolutely any, you can use several cords of different colors at once, while connecting them to one inverter.
4
Another way to use neon in the design of the car is the illumination of the bottom or interior of the car using neon tubes. They are of different quantities and can be absolutely any color, which will allow you to easily choose the appropriate to your car. Decide on the location and fastening of the tubes, make marking and measurements to purchase suitable values. In addition to the tubes themselves, you will also need self-tapping screws and clamps, transformer, wires, insulating material and tools.
5
According to the markup, secure the tube on the bottom of the car with self-draws or clamps. Connect the wires that come from the tubes, while in no way forget about the observance of polarity. Under the hood of the car, find a free space, it is necessary to fasten the high-voltage transformer on it, then connect it to the battery with high-voltage wires. From a minus wire, stretch into the cabin switch, and connect the wires from neon tubes to the high-voltage block.
6
In the same way, neon inside the car interior is mounted. Start from the back of the cabin, connecting the wires and attaching the backlight tubes to the trim. From the positive contact of the battery, select the wire and install the fuse on it. Then connect to a positive wire from the battery, spend into the cabin where to install the switch, and connect the wire to the tubes through it. Minus contact should be connected directly to the body.
Neon backlight is extremely easy to install and use, and thanks to its diverse color palette will help give your car individuality.
Thanks to the author for the article. There was almost the entire Internet, but only two articles helped me in this thread. I used the flexible backlight as described here, since neon lamps in the tubes are much more expensive.
0
1594
Thanks to the author for the article. There was almost the entire Internet, but only two articles helped me in this thread. I used the flexible backlight as described here, since neon lamps in the tubes are much more expensive.