Installing the battery in the car - the case is simple. It is enough to know some nuances to cope with this even a newcomer.
1
Before installing a new battery, you should make sure it is suitable. In the documents for the car you can find all the necessary information. Namely, what should be the container, polarity, configuration, method of fastening and the size of the current-pressure elements. Failure to follow the claimed characteristics leads to rapid wear of the starter and the battery itself.
2
If an old battery is installed, then you need to pay attention to its external state. It should be cleaned from dust and dirt if there are oxides on terminals or contacts, they should be removed. The battery housing itself is to wipe from dust with a rogue with soda water or an aqueous solution of ammonia alcohol. When cleaning, examine the same housing to integrity and check whether the gas hits are not contaminated.
3
Further, put the battery to the regular place, fasten with fastening nuts and retaining. Energy storage should not be peeled in fastening grounds. Before connecting the wires to it, their tips should be cleaned. Milking nuts must be lubricated with special oxidation lubrication. Wrap your nuts with sufficient effort and check the connection correctly.
4
Installation of the energy source should be performed at air temperature not lower than + 25 ° C. If you have to install it in frost weather, on an open parking, then it is possible to warm up before that in room. For longer operation, it is desirable to take care of the thermal insulation of the battery.
Do not forget that the battery in the car is not an additional, but the main source of energy. Therefore, carefully follow the instructions when installing and operating the battery.
0
1594
