How to connect a subwoofer to a radio without amplifier

To connect the subwoofer to the magnetol, it is not necessary to use the services of a car service. A powerful speaker system can be connected with your own hands. If you are interested in installation of an active subwoofer (not to be confused with the passive in need of an amplifier), you appealed to the address. Observing the same below, the specified instigated and adhering to the safety equipment, you can enjoy the speaker-clear music already very, very soon.

Remove the car from the connector and find two inputs. With linear wire, connect the subwoofer to the input of the main device. In order to establish meals, from a positive battery terminal, stretch the wire to the subwoofer.

Next, you need to install an important element - a fuse. As a rule, it is installed precisely near the battery.

Due to the fact that low-frequency sounds increase the level of power consumed by the subwoofer, the load on important elements that feed the onboard network increases. To avoid unnecessary troubles, it is worth installing an additional capacitor for feeding a subwoofer.

Constressor to the supply chain of the subwoofer, given the polarity. Do not forget about safety technician: All work should be carried out only with the engine off.

When all components are properly connected, it's time to start the speaker system, namely to its settings. The whole process is reduced to fixing the upper limit of low-frequency dynamics and the selection of the oscillation phase.

If on your subwoofer, there is a function of adjusting the boundary level of the upper frequency, be sure to configure it. There are cases where the amplitude-partial characteristics of the subwoofer and mid-frequency speakers are poorly docked. As a result, either a failure, or overestimation at the ache. It is for this that the above mentioned function is provided that it is important not to miss.

Finally, it remains only to distribute everything in its place. Now you can enjoy listening to any music in powerful and clean playback.

Connecting an active subwoofer has become a rather popular process. Not requiring an amplifier, it is able to reproduce frequencies of 20-120 Hz. In addition, the personnel installation does not take away certain strength, no extra time.