Poles the ceiling is an The cheapest option to design the interior design, and therefore the most popular. Beat ceilings in apartments, houses and in production premises. During whitames, special devices are used, such as rollers, pulverizers with compressors. The roller is suitable for working at home, as this is the most economical option of the application of a whitening composition. Compressor B. layout The pulverizer is used more often on an industrial scale.
How to bother the ceiling - basics
- Before proceeding with white, you need to clean the ceiling. Old whitewashes together with mud, dust and cobweb. If you approach this work poorly, then Belil swell and appear. Old layer clean With a metal spatula, a sponge for a bath with a soap solution. To use a spatula, the capacity for collecting an old whitewash is prepared. The layer is clearly removed, if you hold the spatula at an angle and make your old blame. To use a sponge with soap solution Take a bucket with warm water and dilute soap. Next, they simply wash off the whole pavement from the ceiling. You can alternate a spatula and a sponge, so it will go faster.
- The ceiling can be blushing with lime and chalk. Chalk is removed much easier. To determine what the ceiling was processed, you should spend your hand over the surface. White traces talk about chalk coating. After the ceiling is cleaned, a 10% copper sulfate solution is applied. When work with the ceiling is conducted in the kitchen, you can find wake-up tracks over the slab. Such places are treated with 3% hydrochloric acid solution. If formed Fat stains, a solution of soda calcined soda is used.
- An uneven ceiling is aligned, the cracks are filled with plaster. The main rule of work is to work with such a material that was used on the lower layer. If the cracks have been clogged with lime, they use lime. Put spacure adhesive - 1 part of the chalk, 2 parts of the gypsum, 2 parts of the joinery glue. Work with a spatula, as with a conventional putty. After drying the solution, the surface is grouped sandpaper Different graininess, preventing severe roughness.
- In order not to stain furniture and walls in the house, first engage in the ceiling, and only then they continue to process the walls, moving downward. Furniture that is easy to put out of the room is cleaned. The rest of the interior items are carefully covered polyethylene.
- When working with a pulverizer, the solution is stirred particularly well, as it is difficult to clean the tool and small particles are strongly clogged. Through the nozzle ceases to pass fluid, it is necessary to disassemble and clean the entire system.
- Swimming appear during duski Heating devices. Also, problems cause direct sunlight and drafts.
How to bother the ceiling - chalky solution
Composite parts of chalk pair:
- 5 liters of warm water;
- 30 g of joiner's glue;
- 20 g xyki;
- 3 kg of chalk.
Cooking process:
- Composite parts are added separately for better dissolutions Mentally mixed.
- Sink helps to strengthen whiteness.
- In the case of too liquid consistency - the chalk shoes stir Before the disappearance of lumps.
- From the first time it will not be possible to put the chalk evenly, so the blots repeat until propellars disappear.
- To blame correctly, moving the "cell". First move in one direction, then on the intersection of the previous layer.
How to bother the ceiling - lime mortar
Components limestone Poons:
- Haired lime - 3 kg.
- Salt - 100 g
- Aluminum Komasians - 200
- Dye - 500 g
- 10 liters of water.
Cooking process:
- Such proportions will be required by 1 l of the survey solution. Composite parts of stages connect.
- To lime uniformly legal to the surface should be done moisturizing With a sponge with water, or the pulverizer.
Whistling everyone can do and there is nothing complicated. It is important to comply with the necessary proportions, to have high-quality tools with you. Also following the advice that will help you quickly understand the problem. With well-done work, the whitewash will last on potoneylCE is about 5 years. Instead, whitewings use a water-free, but then the process will be called painting.
0
1014
