Grilled thin sheets of veneer are called plywood. To date, it is often used when finishing residential premises. There are three types of plywood: normal, laminated and moisture resistant. In order for plywood to serve you for a long time, it is painted.
1
Before embarking on painting, it is necessary to prepare the surface of plywood. Collect the irregularities of coarse-grained emery paper perpendicular to the direction of the material texture. Collecting fine-grained paper along the material structure, you will get a perfectly smooth surface.
2
The plywood edges can be slightly riddled by covering after this section of the edges of acrylic paint several times.
3
The internal cracks of the facial veneer, depending on the temperature, have the property to narrow and expand, so the surface of the plywood is ground.
4
Before painting, cover with anything furniture and floor so as not to fall out the surrounding space.
5
The paint uses foam and fur rollers, as well as sprayers. If the fur roller is a low-quality, then after it will remain a villi, which is difficult to remove. With a foam roller, things are easier. Paint falls smoothly and without divorce. For thin fragments and corners, a brush is suitable.
6
If you decide to combine colors, it is better to use a painting ribbon.
7
Do not smear a lot of paint, so that avoid the flops. Spread it evenly and quickly.
8
After the paint dried, you can apply lacquer from above. This will give a laser plywood larger.
In the trim plywood there are many advantages. This is a simple work that does not require careful care. Everything else, plywood - material, the cost of which does not hurt your family budget.
0
2720
