The chain grid is a recognized leader in the montotiming of fences in private areas. Moreover, it does not matter, whether you get our own plot in the city or for its feature. Such a massive application is determined by the high consumer characteristics of this material: low cost, simplicity of installation and durability. But no matter how beautiful the grid bought by you, it still has one disadvantage - its incredible appearance. But this minus is easy to eliminate - it is enough just to paint.
1
The painted slave radically changes its appearance and turns from a conventional fence into a colorful fence. There are several ways to paint the grid. This can be done with a brush, fur mittens, roller or sprayer. You can paint as a mesh-scattered grid and already installed as a fence. During painting work, be sure to use rubber gloves, safety glasses and gauze bandage. Compliance with these security requirements will protect your internal organs from the effects of poisonous substances that are part of the paint.
2
Before direct application of the paint layer, the grid must be prepared. With the help of a metal brush, clean it from rust raid. Dust and dirt erase using a wet rag. Give the grid to dry, then apply a layer of primer, in this case it is better to use Lacra GF-021 or a stainless ground that combines anti-corrosion soil and rust converter. The soil will uniformly cover the grid, give it additional protection against corrosion and improve paint coupling with a metal base. Use paint designed specifically for applying a metal surface, such as Hammerite or Tikkurila.
3
Using the brush, apply paint to each cell of the mesh first on one side, then on the other. Painting Mesh Fur Varetle is based on the same process. The only difference is instead of the brush, use a midge, twisted on the wrong way. Lower it into the vessel with paint and start painting the cage behind the cell. This option is suitable for coloring small areas.
4
The technology of painting mesh roller is radically different from the above. To realize it in life, you will need a partner. Take paint simultaneously from two sides of the grid, this will significantly speed up the process and reduce material consumption. Movements must be synchronous to minimize paint losses and reduce fencing fluctuations during this process.
5
If you have a paintopult - boldly take it for him. The use of a sprayer will minimize the cost of time, but will significantly increase the paint consumption, since most of it will simply fly through the grid. Paint for collapral Tend the solvent to reduce it. Otherwise, she can score the sprayer and fully derive it.
The painted grid in its appeal is not inferior to other species of modern fences. It reliably protects your site from animal penetration and give the site a pretty appearance.
0
1707
