Before staining, interior doors are recommended to be pre-removed from the loops and arrange in a horizontal position. This is done in order to uniform staining of the surface and in order to avoid packets. Next, you should free the doors from the fittings and score the formed openings by cotton or x / b tampons. You can stick the handles and castles by painting scotch, if they are not removed. In the glazed doors, the glass around the perimeter is also covered with a painting ribbon.
Required inventory
To carry out painting works, you will need materials and tools:
- Putty, spatula;
- Brushes, paint;
- Roller, sponge;
- Cotton tampons, skin;
- Tools for removing the old coating with doors, possible options will look below.
Preparatory work before staining
Wooden doors must be carefully cleaned from the previous finish. Consider how and how to remove the old paint. This is done in several ways:
- Using a 20% solution of technical carbolic acid, potassium or caustic sodium. Chemical substance is applied to the door and leave half an hour. After this time, the surface is well washed with water. Next, you should wait for a complete drying of the door.
- Using a soldering lamp: an old coating warms up and removed with a spatula, and the residues are watched with an eyebrow (sandpaper). This procedure is necessarily carried out in the open space, since the burning paint has an unpleasant smell.
- If the farm has a drill with a brush nozzle or grinding, then removal can be performed by these instruments.
- Special substance for removing paints and varnishes, which can be purchased in specialized stores. Very often it also has a sharp smell and low quality.
Surface preparation tips for finishing
You can make a wash with your own hands: caustic soda is added to the water and stirred to the creamy mass. In the resulting solution, some oatmeal puffs and dense the old paint until softening. The spatula gently remove the composition together with the coating. You can save the door from residual paint with the help of sandpaper, as well as hesitate small irregularities. Next, cracked cracks, minor defects, chips and mechanical damage to the door. We give putty to dry. The last stage of the preparatory work is primed or staining of the oil surface.
The process of coloring
After the primer is completely dry, we stick to the painted scotch, those places that will not be painted. Before using the brush are combed from villi and pre-soaked in water for 10 hours. They paint small elements, and wide parts are stained with roller. The door begins to cover the material from left to right, starting with the top. All unwilling parts of the door design are stuck, and at the end of the applying finishing, the tape is cleaned. If this is not done on time, then with painting scotch, dried paint will be separated. Paint the doors in several goals.
How to paint the door in a residential room
There are such types of paint and varnish coatings for interroom doors:
- Enamel alkyd. The most popular paint due to the huge selection of color solutions, its availability and reliability. The disadvantage of this coating lies in a sharp smell that keeps up to 2 days after work. Alkid's enamel in children's rooms and where allergies are located.
- Nitrocracy. The most successful investment in the decor of the room is such a coating combines durability and beautiful door trim. It is expensive, but quite paying off with its positive properties.
- Acrylic enamel. It has such advantages: lack of any odor and a wide selection of different shades. Of the disadvantages: high cost and insufficient density of the coating, which should be painted with re-acrylic varnish.
The paint coating is selected based on the material of the painted web. We looked at the species of paints for products from wood, of which interior doors are most often performed. If you are painting in a residential room, then for the period of work it must be empty due to the toxicity of any paint used.
0
975
