The need to dismantle the stretch ceiling may arise over a variety of reasons. It is a replacement or repair of communications that are located behind the cloth, and flooding from neighbors, and so on. The ease of removing the stretch ceiling depends on its design and the type of fastening.
1
First of all, determine the type of stretch ceiling. Usually this information leaves the company that carried out installation. If this data could not be found, you can determine yourself. By type the canvas distinguish the ceilings from PVC and seamless fabric. There are also such varieties of fastening systems, like harpoon, stroke and with a plastic clip. The last stretch ceiling is easily removed, with two other types of fasteners will have to tinker.
2
Since the stretch ceiling is a pretty expensive thing, it is best to turn to specialists to dismantle it. If you are confident in your abilities, you have a reliable assistant and toolkit - you can handle yourself. From the instanta you will need: a narrow plastering spatula with blocked angles, pliers, a knife mounted, stepladder. It is advisable to warm up the room with the help of a thermal installation.
3
When the harpoon fastening system, remove the ceiling web should be started with the corners. Remove the decorative insert when presented. With the help of pliers, you grab the harpoon and pull out the cloth for it. Please note: it is necessary to pull exclusively for harpoon, otherwise you risk breaking the cloth. Also pre-seize the pliers so that there are no burstages. After the release of part of the web, the further process goes manually, use the gloves. Remove PVC from the corners to the center of the walls.
4
Disassembling the film with a stroke or wedge mounting is initially carried out in the same way as with harpoon. Next, with the help of a spatula, the aluminum profile is rejected with the aim of liberating the stroke. Pull it with a screwdriver. Make sure not to deform the baguette and not damage the cloth.
5
When removing the tissue cloths, the process is similar to PVC, only does not require warming up and start dismantling from the center of the walls to the corners. Also remember that partial disassembly when clips fastened is impossible, it is necessary to remove everything cloth, otherwise the fabric can jump out of the clip, and this will lead it to disrepair.
Remember that the dismantling of the stretch ceiling can lead to irreversible consequences, after which the canvas will become unsuitable for re-editing. If there is a need to access the interpoatar space, you can always release the edge of the canvase or use holes for lighting devices.
0
4178
