Mosquito nets are removed for winter or for cleaning. Remove the grid is easy, it is enough to study the fastening system. Mesh design is different (there are frame, rolled and sliding), so methods for fastening to the window also differ.
General Recommendations for Removing Grids
Remove the grid into mad weather. If the next sash opens, ask for home to inshast the product, holding the frame outside. It is possible to dismantle the frame through the adjacent sash.
Dismantling frame grid
The frame grid looks like a quadrangular metal frame with a fixed web. Fastened to the window in three ways - on corners, on pockets or hooks. Corners are attached to the frame from the street, along the corners of the frame. To dismantle the grid, lift the handles, reject 2 cm from the bottom side window (before leaving the bottom corners). Lower down the frame on the sampling, one hand take over the bottom, turn the horizontal position and enter into the room.
Grids are also released with pockets, screwed to the corners of the frame. Dismantling is similar to the previous option - raise the frame, and then the bottom to rejoint and output. Remove the grid with hooks is also simple. Hooks are attached to the mesh frame, in the fixed position cling to the window profile from the side of the room. The grid is removed in the same way as in the case of corners and pockets. The mesh fastening elements do not dismantle.
Dismantling of sliding nets
Sliding grids put on the coupe. The design on the sluts on a special guide is moving. Such bridges are two, top and bottom of the grid. To dismount, lift the grid up, output the lower runners from the guide, then lower down and remove from the window.
The variety of sliding grid is pleated, which is installed in the ordinary window opening. When shifting to the side, it folds into the harmonica. It is dismantled in the same way as the sliding grid.
Dismantling mosquito nets on plungers
The most reliable attachments are the pin (plunger) connection. The mesh frame is screwed to the pins to the window profile in the upper and lower part. Plunger is a complex node consisting of a metal pin with a hat and a spring. To dismantle the grid, remove the plunger from the hole. If the item cannot be pulled out, check the pin several times with the plunger clockwise. It is not recommended to rotate in the other way, you can promote the plunger and lose the items.
Dismantling of other grids
The grid of the old sample is dismantled from the window is heavier. It is attached to self-drawing and nails. To dismantle, use the impressions and pliers, dismantle the fastener and the canvas itself. Traces from nails make a self-adhesive film.
Door mosquito nets are held on the hinges, are fixed to the profile using magnets. To remove it, lift the design up and remove from the loop.
Roll mesh on the principle of action resemble blinds, the canvas in a non-working condition is located in the box. Fixed over the window. If necessary, remove the grid together with the box.
The frame can be attached to the profile by plastic flags from two or four sides outside the window. To dismantle, open the next door, drop out of the window and move the boxes to the side, then dismantle the frame with the web. The operation is quite dangerous, so the second person is necessary for insurance.
The process of removing the grid with apparent simplicity requires a certain skill. Repeat the operation in the presence of the wizard still at the window mounting window.
0
1652
