How to beat the wallpaper on the ceiling

Ceiling pasting has always been considered difficult, but even for beginners. Change the wallpaper, you can give a housing fresh, updated view. A magnificent variety of structures, styles, colors and sizes will allow you to choose the most successful option for each room. If you decide to start repair work, make sure that all the steps are known to you.

The first, an important step is the choice of finishing material directly. A fairly simple and affordable option - paper wallpapers. More durable and durable - vinyl. The most reliable, but at the same time and dear choice - textile and flieslinic trellis. Given the ceiling area, buy a sufficient number of identical or different (for combined pasting) wallpaper rolls of the most suitable color gamut.

When the first stage is completed, and the packaging of new stylish choler is already banging in the corner, proceed to the preparation of the necessary tool. All you come in handy, can be found at home, at the neighbor or in the nearest store building materials: a stepladder, bucket, roulette, pencil, stationery knife, brush, roller, painting bath, rags, etc.

When the purchase of all necessary is completed, proceed to the preparation of the ceiling. Old wallpaper must be removed. If the ceiling is too buggy, you will have to level alignment. In cases where the old surface is covered with blissing, it must be removed and reounced twice.

There is an opinion that the wallpaper is better to stay on the primer. If you have enough time and finance, cover the surface. So the fresh-tempered canvas will dry faster and serve longer.

Everyone knows that before sticking the wallpaper must be cut. But not everyone knows how to do it right. Put the roll face down and cast the desired length. Measuring a tape measure between the walls, move the measurement with a pencil on the strip. In a place where you want to mark, wrap the sleeper and lay the inflection. Next, from the inside, gently ride it. Just do with the rest of the slices.

Before gluing the first strip, it is necessary to mark a flat line on the ceiling. So wallpapers will be smoothly, without overwhelming and superfluous allen. To do this, step from the edge of the ceiling exactly as much as one bar is in width. Further, at this level, take two nails under the ceiling in opposite walls. Tie to them, tightly pulling, soaked with a chalk rope. Then pull it away at a certain distance and let it go sharply. The ceiling will remain a flat white strip.

Mix the first leaf thoroughly glue and fold the harmonica. In this case, it will be much easier to continue working. Start sculpt it to the ceiling along the harvested white line. As you glue, turn the cloth and align it with a roller in terms of level. Try to rolling all the tubercles as carefully, releaseing the air.

When the first strip has already been pasted, you can smooth out the rest. Stick up the previous rules, do not create adhesive, carefully smooth the cloth. When the work is completed, and the taplars will dry, cut the protruding residues on the interface of the ceiling and wall by the stationery knife.

We hope this information will be useful not only to beginners, but also those who have already come across the pasting ceilings. Carefully rereading our advice, you will cope with the task even alone.