Flizelin-based wallpaper is a unique finishing material. They are economical, since the roll width is more than a meter, it means that fewer joints are formed and less waste, if you have to combine the drawings. They are well masked irregularities and disadvantages of walls, while racks for erasure and light-horse. And most importantly - flieslinic wallpaper can be repainted up to 10 times! Yes, and glue them is not more difficult, and sometimes easier than ordinary paper.
For a start, calculate the number of wallpaper required for pasting room. To do this, measure the width and height of the room on each wall. When you consider the number of rolls, add a few centimeters to the length of the cloth. For greater reliability you can draw a preliminary plan on paper. By the way, when choosing wallpaper, pay attention to the party number, all selected rolls it should be the same, otherwise risks to purchase rolls with different shades. The preparation of the room is an important stage before sticking fliseline wallpaper. From the walls you need to remove old coatings. To get rid of old wallpaper, you can wet the wall with rags and water. After the wallpaper is softened, remove them with a spatula. The walls need to be aligned, if necessary - to splash. After that, make the primer with special glue or primer deep penetration. Remember that the walls for pasting flieslinic wallpaper should be dry. In the room, ensure the absence of drafts and temperature drops.If you are planning immediately after pasting the wallpaper of the room paint them, it is best to choose water-based paints, resistant to wet cleaning. It is worth picking up the paints with the effect of silk to highlight the relief of the wallpaper. It is only necessary to do this after a complete dryness of the wallpaper, approximately a day after sticking.