How to breed lime

For a cheap whitewash and disinfection of walls most often use lime. Thanks to her, there will be no fungus and mold. Room, the outer walls of the construction will become white. Price lime Much lower than prices for other finishing materials. In addition, this mixture has moisture resistance and has a high strength indicator. When drying on the wall surface, a film is formed, capable of withstanding not one year the influence of various weather factors (rain, snow, etc.).

Lime happens two types - Gashenaya (Pushonka), Negashing. Pushonka is sold in construction stores in the form of dough and bulk powder. For 18-12 square meters, it will be necessary to dilute in three liters of cold water one kilogram of the product (powder or test).

That's just to dissolve the lime in the water gradually. At first they take a fluff in the amount of one kilogram and pouring the floor of the water. Carefully mixed, the solution is slightly heated due to the chemical properties of lime. After that, the water is again poured, not more than one liter, and stir. The action continues until the solution acquires the desired consistency, i.e. It should not be neither thick or transparent. The populating is sour cream - just right. You don't need to start the whitewash. Give the divorced lime worth the day-two.

Negative lime is often used for cement solutions, plasters. It makes them stronger and gives plasticity to building material. For whitames, the negaring should first repay. The process is not complicated, but requires compliance with security measures. To prevent splashes from entering the lime solution in the eye and the skin will require glasses, rubber gloves and clothing that closes all parts of the body (specialist).

Most often in construction stores sell the monthly lime. To repay it right, do the following:

Prepare a container - a bucket, a bowl (it is necessary that anywhere there is rust).
Put a bucket of 0.25% lime.
Pour cold water (1/2 bucket).
Wooden long stick thoroughly stir the resulting consistency.
Displays lime lime sticks to the solution to be uniform.
The whole period, during which the Negashenka will boil, you need to not cease to interfere with the milk. Boiling time - 5-7 minutes.
Be careful that the drops do not get into your eyes and on the skin.
Now you can add water so that the solution acquires the desired concentration.
Let the time to settle whims (week) and only then proceed to work.

Before applying for walls, auxiliary substances are added to the broken lime. These are such additives like glue, soap, salt, eggs, liquid glass, butter. Thanks to them, the quality, resistance and type of bliss are significantly improved. For example, salt and glue fasten the whitewash, and when drying it, it does not exhaust hands and clothing. Apply the finished solution of lime is better than a special brush or paint. Specialists are not recommended by roller, since the thick layer of the blots stretches behind this tool and falls on the walls ugly.

Now you know how to breed and extinguish lime. Know that the severity solution should not be fat or skinny. If the concentration is large, then on the walls it cracks, respectively, the look will deteriorate. And with a small density, the whitewings will not be saturated color. You can try the consistency with a stick for mixing the solution. Just do it. Then put it dry. If the color is juicy, it falls smoothly, it does not exfoliate - it means you can beat.