The reason for cleaning the well on the household plot can be a decrease in its potential and the appearance of sand in water. The potential in our case is the amount of water that is restored and has difts simultaneously in 1 hour. And the presence of sand in it is equal to the initial sign of the heating of the well. If your source has these problems, we will clean it.
1
Two vibration pumps will be needed for work, the hose, equal to the length of the well depth, and the power supply for the equipment. If the place is selected for the rally, take the length of the hose for 15 m with a margin and dig a trench there.
2
At the next stage, the working pump is retrieved from the well, and then the barrel of the casing. After that, the first vibration pump is lowered into the cavity of our source on the cable. The hose is not needed to it, since his task is torturing the water in the literal sense of the word. It is necessary to raise a dense sediment from the bottom of the well.
3
The second pump is completed with a hose and immersed in the first one.
4
His work is to pump off dirty water. In the process of joint actions, this pair of pumps gradually falls deep into the well, eroding and cleaning the first glass of the column, and then the filter and part of the aquifer. It is desirable to spend these pumps to clean water.
5
After cleaning, the well equipment is installed in place. In order for the quality of the water of your source to be reduced, such a pumping must be performed at least once a year. Moreover, during this time, dirt will not have time to accumulate and become dense.
We hope that our material you liked. Pour clean water and be healthy!
Share advice:"How to clean the well from the sand"
0
1901
