How to drill a well under the water

The well under water is an excellent solution that will allow not easy to save money, but will provide you with high-quality drinking water. You can drill a well to the bottom to a depth of 20 m using modern technologies. To do this, you will need a metal auger (serpentine), for example, fishing ice ax.

You will need:

screw;
pipes for knees, diameter 25 mm;
shovel;
trolley for the export of soil;
pump, hose;
exaltation (for example, table);
squeezing gravel.

The most important thing is to correctly determine the depth of the future well. On the upper layer of soil, water is unstable and can rehabilitate, moreover, its quality is significantly lower. It is best to focus on neighboring wells. The deeper the well, the better the water and the durable design.

Prepare to prepare thick-walled polyethylene pipes, as they need to be omitted immediately after the boring is extracted. Otherwise, the soil can delay. Pipes buy in a construction store. Drill perforizing holes in the pipes at a distance of 0.5-1 m from the bottom end and after 1.5-2 m. Drill take no more than 6 mm in diameter, otherwise you will have to install the filter grid. Prepare the bars that will centen the pipe in the well and create the same gap for the uniform distribution of gravel discrave.

Locked the well under the well. Drop the recesses for a depth of 2 bayonet shovels, strengthen it with boards to avoid squeezing and proceed to drilling. To facilitate the rotation of the bora, soften the soil with water. After two or three full revolutions, remove the boring and clean it from the soil. The resulting sludge timely export to the place of work with the cart.

When the instrument's handle drops to the ground, rotate the car with the knee, standing on the elevation (table, barrel, etc.). When the bruise enters the aquifer (it is easy to notice as a state of the sludge), clean it often, otherwise it will be difficult to remove. Get a boring that sucked, the lever chain winch will help.

Before lowering the pipe, get a few times - lower the boring into the hole to facilitate the descent. When the pipe is omitted, pour the clearance of gravel by the explosion without sand, otherwise it can penetrate inside the well.

Swumble a well with a centrifugal pump (can be ordinary household), while gravel drops will gradually settle, as it should be added. A discharge well to equip the pump for everyday use.

Using manual drilling of the well, you will not only save on costs, but also save the contents of the garden, since there is no need to come in bulky special equipment.