How to make a drawer for flowers

A suitable material for flower boxes will be wood. It is easy to process it, and the dimensions and shapes of homemade containers depend only on your imagination.

Used tools:

Saw or electrolybiz;
Plane;
Sander;
Screwdriver;
Cornel, roulette;
Hammer, nippers.

The design of the plant under the plants is selected depending on the availability of equipment - manually easier to make a simple box, and the use of the power tool makes it possible to carry out any ideas.

Applied materials:

Various boards and racks with a thickness of 10 mm;
Plywood trimming;
Slices of OSP.

For decorative surface treatment, antiseptic will be required, morilka or coloring compositions. The fastening of parts is performed using waterproof glue, nails or screws.

Procedure for manufacturing a simple color drawer:

Billets are cut from a width of 15-20 cm wide: three long for the bottoms and sides, two short for the ends - the sewn of the bottom on the size equal to the sidewall thickness is placed.
Details are placed on the plane, the sections are treated with large emery paper.
Thin openings are drilled around the edges: four in end blanks and three in the side.
40-50 mm long and onboard screws are first fastened, then end parts are screwed.
The collected flower container is polished with a shallow eye.
The wooden box is impregnated with an antiseptic from all sides, and the outside is covered with a verse, varnish or enamel.

The structure of the flower drawer from unnecessary pallets:

The old stand disassembles parts - the planks are neatly approaching the nail, the fasteners are pulled out by forceps.
Breaks strongly damaged and rotten rails, usually there are 10-14 suitable plates.
A sketch is drawn up with an indication of the dimensions of the future product.
Wood It is cut according to the required dimensions and is detected by the abrasive skurt.
The top frame and the lower base of the container is assembled.
Two pieces of the box are fastened by side panels on nails.
Shakes are masked using decorative slats.
Embed to decoration with paint and varnishes.

The outer surface of the drawer can be arranged with wood, thick branches or subtle plates in the form of a stake. The bottom of the container is nourished with legs from bars needed to ventilating and preserving the tree in good condition. Flowers inside the box are placed in plastic pots or planted directly into it, pre-laying the film and making drainage holes.

Made with their own hands floral boxes become exclusive details of your garden or balcony. And the material for homemade can be anything: plastic bottles, wicker baskets, old dishes or unnecessary furniture.