How to make a greenhouse from the film

Requirements for any greenhouses for household plots are usually the same: it is a tightness, convenient dimensions, translucency and long service life.
The designs of such plastic facilities or glass are durable, but require large financial costs. Therefore, today we will choose an economy version of the greenhouse made of polyethylene film. A similar greenhouse is easy to install independently, and its coating is needed to quickly replace. Work on creating a greenhouse from film Delim to the steps.

The construction site is chosen on the sunny side, focusing the direction of the West - East, then place and align.

Along the walls of the future greenhouses, we drive into the ground with a step of 1 m with a length of a metal corner with a length of 30-40 cm. The minimum width of its shelf is 30 mm. On the surface, we leave 10 cm of the segment, each of which is drilled by one hole under the screw for fastening the base of the frame. Pre-corner paint a bitumen or other anti-corrosion composition.
Each corner with bolts are fastened vertically in the level of wooden bars with a size of 2000x30x40 mm. Intermediate bars to support roof designs are set if the width of the greenhouse is selected in the size of more than two meters.

Then we bind them between the crossbars in the horizontal direction. For this work, steel corners, wood screws and a screwdriver are used.

The roof of the greenhouse will perform a two-tie with a large bias to prevent precipitation. To do this, connect the bars an angle and place them on the end of the frame. Angles are attached on vertical racks, and then combined with a skate bar with nails. Additional "angles" are set to enhance the roof design with a large frame length.

Now that the frame is ready, you can cover it with a polyethylene film. To do this, you need to transfer the prepared cutting strips through the roof and fix them on the skate. Then, with thin rails and small nails, the film is fastened on the side and end parts of the frame, observing its uniform tension.